Advertisement
Z_ WARNING:
BE SURE to read and understand
al! instructions
in this
manual
before
using this
level. Failure
to follow
all instructions
may result
in hazardous
radiation
exposure,
electric
shock, fire andlor
serious
personal
injury.
SAFETY
PRECAUTIONS
FOR LASERS
Z_ WARNING:
Use of controls,
adjustments
or performance
of
procedures
other
than
those
specified
in this manual
may result
in
hazardous
radiation
exposure,
Z_ WARNgNG:
The use of optical instruments
such as, but not limited to,
telescopes or transits to view the laser beam will increase eye hazard.
This level has a built-in
laser light. The laser is a Class Ilia and emits output
power
of
a maximum
2.5 mW and 635-665
nm wavelengths°
These lasers do not normally
present
an optical
hazard,
However,
DO NOT stare at the beam as this can cause
flash blindness.
CAUTION
The following
label is on your tool. It indicates where the
level emits the laser light. BE AWARE of the laser light location when using.
ALWAYS MAKE SURE that any bystanders in the vicinity of use are made
aware of the dangers of looking directly into the laser.
WARNING:
LASER LIGHT, LASER RADIATION. Avoid Direct Eye
Exposure. DO NOT stare into beam. Only turn laser beam on when the level
is on the work surface. Class ilia laser.
1. DO NOT remove
or deface
any product
labels.
Removing
product
labels increases
the risk of exposure
to laser radiation_
2. DO NOT stare directly
at the laser
beam
or project the laser beam directly
into
the eyes of others.
Serious
eye injury could result°
3. DO NOT place
the LaserTrac
TM
level in a position
that may cause anyone
to stare
into the laser beam intentionally or unintentionally.
Serious
eye injury could
result.
4o DO NOT use any magnifying
optical
tools
such as, but not limited
to, telescopes
or transits
to view the laser beam. Serious
eye injury could resulL
4
Advertisement
