When The Expected Images Are Not Projected; Turning The Power Off; Installing And Removing The Cable Cover - Epson EH-TW5500 User Manual

When the expected images are not projected

If more than one signal source has been connected, or if no images are projected, use the remote control or the
projector's control panel buttons to select the signal source. For video devices, press the [Play] button on the video
equipment first, then select the signal source.
Using the remote control
Press the button that has the name of the port
on it that the desired signal source is connected
to.
When the color of the image projected from the [Component] input port is
unnatural, select an appropriate signal according to the signal from the device
connected at "Input Signal" in the Configuration menu.
TIP

Turning the power off

Turn the power off for the signal sources
that are connected to the projector.
Press on the remote control or
the projector's control panel.
The following message is displayed, so press
once more.

Installing and removing the cable cover

When the projector is suspended from a ceiling, you can use the cable cover to improve the appearance.
Installing the cable cover
When the expected images are not
projected
Turning the power off
When the expected images are not
projected
on
Turning the power off
Installing and removing the cable
cover
Starting and Stopping Projection
Using the control panel
When you press , the menu is displayed.
Each press of moves the pointer. Move the pointer to the
target input source to select it.
The input source is automatically switched when no operations are
performed about three seconds with placing pointer at the target
input source. You can also press
When cool-down (approximately 16 seconds)
is completed, flashing around the
and you can then turn off the main power
switch.
Simply pressing
electricity consumption.
or
Attach the lens cover.
If the projector is suspended from a ceiling and the
lens cover is left removed, the lens cover will still be
needed if the projector is moved anywhere, so keep
it in a safe place.
Removing the cable cover
to switch to the target source.
p.35
or does not stop
stops
15