Epson TM-T85 Operator's Manual page 94

Character Width Selection
Hex Decimal
00 0
10 16
20 32
30 48
40 64
50 80
60 96
70 112
[Notes]
[Default]
[Reference]
G S $ n n
L
[Name]
[Format]
[Range]
[Description] • Sets the absolute vertical print starting position for buffer
[Notes]
5-36 Commands
Table 1
Width
1 (normal)
2 (double-width)
3
4
5
6
7
8
• This command is effective for all characters (except for HRI
characters).
• It n is outside of the defined range, this command is ignored.
• In standard mode, the vertical derection is the paper feed
direction, and the horizontal derection is perpendicular to the
paper feed direction. However, when character orientation
changes in 90° clockwise-rotation mode, the relationship between
vertical and horizontal directions is reversed.
• In page mode, vertical and horizontal directions are based on the
character orientation.
• When characters are enlarged with different sizes on one line, all
the characters on the line are aligned at the baseline.
• The ESC ! command can also turn double-width and double-
height modes on or off. However, the setting of the last received
command is effective.
n = 0
ESC !
H
Set absolute vertical print position in page mode
ASCII GS
Hex 1D
Decimal 29
0 nL, nH 255
character data in page mode.
• This command sets the absolute print position to [(nL + nH
(vertical or horizontal motion unit)] inches.
• This command is effective only in page mode.
• If the [(nL + nH
exceeds the specified printing area, this command is ignored.
Character Height Selection
Hex
00
01
02
03
04
05
06
07
$ nL nH
24 nL nH
nL nH
36
256) (vertical or horizontal motion unit)]
Table 2
Decimal Height
0 1 (normal)
1 2 (double-hight)
2 3
3 4
4 5
5 6
6 7
7 8
256)