On-Off Switch - Craftsman 113.23800 Owner's Manual

/
19. Plug motor cord into outlet on back of switch box. Do
not plug motor cord into power source outlet.
20. Position the two cords as shown and clamp them to the
table With tWO cable clamps. Attach the clamps with
1/2" wood screws
21. Coil up the slack in the cord and tie it with a piece of
tape.
\
MOTOR CORD
CABLE CLAMPS
WARNING: DON'TCONNECTPOWER CORD TO
ELECTRICAL OUTLET IN YOUR SHOP UNTIL
YOU ARE READY TO CHECK MOTOR ROTA-
TION.
ON-OFF SWITCH
The On-Off Switch has a locking feature. THIS FEATURE
IS INTENDED TO PREVENT UNAUTHORIZED AND
POSSIBLE HAZARDOUS USE BY CHILDREN AND
OTHERS.
1. Insert key into switch,
NOTE: Key is made of yellow plastic.
KEy
[YELLOW f_LAS1 IC
I
I
I
KEY
10