Table of Contents
Advertisement
"1"V-20240
CONNECTIONS
CABLE
BOX
CONNECTION
There are two basic types of antenna/cable
hook-ups. They are easy to distinguish.
Type 1:
If you use an antenna or have s cable television
system that does not require the use of s
decoder box to receive signals, use the diagram below to connect your TV/VCR combo.
COMBINE TV
1) Connect the cable or antenna wire out from the wall in to the TV VHF/UHF
input at the rear of the combo unit.
2) Plug the power cord into a nearby AC outlet.
Type 2:
If you use an cable box to access any or all channels, use the diagram below.
"IV COMBO
1) Connect the cable wire out from the wall in to the cable box RF input.
2) Connect an RF cable outfrom the cable box in to the TV VHF/UHF input.
3) Plug the power cord into a nearby AC outlet,
No.51520
2-5
Advertisement
Table of Contents
