Changing The Aspect Ratio - JVC GM-V42UB Instructions Manual

Plasma display monitor
Hide thumbs Also See for GM-V42UB:
Table of Contents

Advertisement

DISPLAY
ASPECT
i i
ASPECT
MUTING
VOLUME
MENU/EXIT
\
J
With this Monitor, you can select among three types of wide
screens (FULL, ZOOM,
and PANORAMIC)
in addition
to the
REGULAR screen of conventional
4:3 aspect ratio.
Press ASPECT to select the screen size.
Each time you press the button,
the screen size changes as
follows:
"_p REGULAR
FULL "_1
ANORAMIC _
ZOOM_ "_
REGULAR:
Displays at conventional
4:3 aspect ratio.
÷
FULL:
ZOOM:
REGULAR size display
is enlarged
horizontally.
I
÷°
REGULAR size display
is enlarged
vertically
and horizontally
at the same ratio.
I
°
Precautions for using the screen mode switching function
o This Monitor
features
a screen mode switching
(aspect ratio
change)
function. If you select a mode different
in aspect
ratio from software
such as TV programs,
the picture
may
look different
from original picture. Be aware of this point
when you are selecting
a screen mode.
* If you select a wide screen mode while viewing
conventional
video programs
of the aspect ratio 4:3, some
portions
(edges) of the original picture will be cut off, or
deformed.
I\_ enjoy the original picture
as it is, select
"REGULAR"
while viewing such program s.
* If you place the Monitor
in a tea room, hotel, etc. for
business
purposes
or public viewing
and modify
the picture
by using the screen mode switching
(aspect ratio change)
function,
this could violate the copyright
protected
by the
copyright
law, which requires your special attention.
* If you make the screen very bright and watch programs
selecting
"REGULAR,"
for a long period
of time, the
Monitor
screen may happen
to be burned
in. If this occurs,
watching
programs
using a wide screen mode for a while
will reduce the burn-in
gradually.
PANORAMIC:
REGULAR size display
is enlarged
horizontally
to the extent that the picture
does not look abnormally.
e @ ÷
÷
Notes:
* When one of the following
signals is being input, you
cannot select the aspect ratio you want.
[] 1080/50i, lO,qO/60i, 1035/60i or 720/60p signal through the
COMPONENT/RGB
B input terminals
You can only select FULL.
[] W]wn any s_nal other than RGB15K-60 and RGB15K-50
through the RGB A or COMPONENT/RGB
B input terminals
You can select only REGULAR and FULL.
* The aspect ratio can also be changed
on the Function
Selection Menu (page 21).
15

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gm-v42ug

Table of Contents