Setting Up Photopc P-1000; Charging The Battery - Epson PhotoPC P-1000 User Manual

Setting Up PhotoPC P-1000

After unpacking your PhotoPC P-1000, set it up so it
is ready to use. This section describes how to charge
the battery, set the memory card, and turn the power
on and off.

Charging the battery

Your PhotoPC P-1000 comes with a lithium-ion
battery. See the following sections for details on
installing and replacing it.
Installing the battery
Install the battery as shown in the instructions below.
1. Slide the battery cover release as shown below
and remove the battery cover.
2. Insert the battery into the compartment,
positioning the + and - ends with those on the
inside of the compartment.
13
Getting Started
2
2
2
2
2
2
2
2
2
2