Power Supply; Installing The Dvd-Cd Drive; Removing A Node Power Supply - HP StorageWorks 12000 - Virtual Library System EVA Gateway User Manual
Hp storageworks 12000 gateway virtual library system user guide (ah814-96014, march 2010)
Hide thumbs
Also See for StorageWorks 12000 - Virtual Library System EVA Gateway:
- User manual (264 pages) ,
- Manual (218 pages) ,
- Design manual (160 pages)
Table of Contents
Advertisement
2.
Slide the drive into the bay until it clicks.
Figure 60 Installing the DVD-CD drive
.
Power Supply
CAUTION:
To prevent improper cooling and thermal damage, do not operate the node unless all bays are
populated with either a component or a blank.
1.
Disconnect the power cord from the power supply.
2.
Press the power supply release lever (1), and then pull the power supply from the node.
Figure 61 Removing a node power supply
.
To replace the component:
WARNING!
To reduce the risk of electric shock or damage to the equipment, do not connect the power cord to
the power supply until the power supply is installed.
1.
Remove the protective cover from the connector pins on the power supply.
HP StorageWorks
205
Advertisement
Table of Contents
