Maintenance after Installing the APD
Maintenance procedures after the APD is installed.
• Adding the printer driver
• Uninstalling the printer driver
• Replacing a printer
• Changing the port settings of the printer driver
• Upgrade installing the APD
Adding the printer driver
Follow the procedures below to install the printer driver.
You cannot add the printer drivers directly from [Start] - [Control Panel] - [Hardware and
Sound] - [Printers].
1
Select from [Start] - [All Programs] - [EPSON] - [EPSON Advanced Printer
Driver 4] and open [Change or delete APD4, or create a silent installer
for APD4.]
2
The "Welcome" screen appears. Then select "Custom" and click the
[Next] button.
3
The "Select Features" screen appears. Select the features of the APD
you want to install, and then click the [Next] button. The following
features are available.
Features
32 bit printer driver
64 bit printer driver
TMfLogo
Status API .NET
Devmode API .NET
Create shortcut on Start menu.
(Reference page of other
OS.)
Supports EPSON printer driver for 32 bit version OS.
Selectable when installing from 64 bit version OS.
Supports EPSON printer driver for 64 bit version OS.
Selectable when installing from 32 bit version OS.
Installs the TM Flash Logo Setup Utility and TM Flash Logo Setup
Utility Ver.3 that allows you to save bitmapped images to the TM
printer.
Supports Status API in .NET environment.
Supports Devmode API in .NET environment.
Shortcut icon to the APD will be added in the Start menu.
Default setting : checked
Chapter 2 Installation and Setup
Description
2
55