Table of Contents
Advertisement
When connecting Customer Display
This section explains how to install the APD when connecting a Customer Display to a TM
printer.
Installation Flow
1.
Installation when using pass-through connection (page 29)
Installation when using Y-connection (page 33)
Installation when using pass-through connection
The pass-through connection is a connection method to connect the computer and the TM
printer via the Customer Display.
The serial interface must be used and the communication settings on each of the three devices
must be the same. For information on DIP switch / Memory switch settings on the Customer
Display and the TM printer, see the User's Manual supplied with the TM printer or the Technical
Reference Guide.
2.
Connecting the devices (page 37)
3.
Test print/display (page 38)
Serial
Serial
Chapter 2 Installation and Setup
to TM printer
Modular
2
29
Advertisement
Table of Contents
