Summary of Contents for Servore SERVO GLAS 4000
- Page 1 #406 Woolim e-Biz Center, 170-5 Guro-dongGuro-gu, Seoul City, Korea. TEL : +82-2-861-6691/2 FAX : +82-2-861-6693 Home page: www.servore.com E-mail: servore@servore.com...
- Page 2 #406 Woolim e-Biz Center, 170-5 Guro-dongGuro-gu, Seoul City, Korea. TEL : +82-2-861-6691/2 FAX : +82-2-861-6693 Home page: www.servore.com E-mail: servore@servore.com...
- Page 3 Safety is a personal responsibility. Servore endeavours to produce high quality safety products that meet or exceed relevant Standards and provide appropriate protection when used properly. Please help yourself and those around you by using this product carefully and by exercising good judgement.
- Page 4 4000 provides eye and face protection to meet or exceed EN379 and EN175 and other relevant Standards where indicated. The following example illustrates these requirements. Please note this example is provided for illustration purposes only. The following parts are available from Servore and your authorized ServoGlas 4000 distributor.
- Page 5 0.05 msec - TIG welding (Pre-shading Tech.) Switching time 1. Solar Cell Panel 2. Sensor 3. LCD Filter Plate (light-dark) 0.06 msec - ARC, MIG, MAG welding 4. Sensitivity Control 5. Shade Control 6. Delay Switch Slow : 0.3-0.6s Fast : 0.1-0.35s Delay switch (dark-light) 7.
- Page 6 Where problems are experienced during welding at low currents The required filter dark state can be selected by [e.g. TIG] or there is a high level of ambient light please follow using the shade control. The ServoGlas 4000 these steps: First try adjusting the sensitivity control switch. If can be adjusted between shades 9 to 13 with this does not solve the problem hold the helmet close to the the embossed arrow on the dial indicating the...
- Page 7 To replace the protective inside cover plate the filter cartridge must be removed from the Always ensure that all maintenance procedures are conducted in a clean retaining guide frame. Always ensure this process is conducted in a clean dry place and dry place.
- Page 8 Your Servore welding helmet is strong and durable. It is designed to work in The Servo Glas 4000 uses two batteries to provide backup power. Always replace temperatures between -5C and +55C. Do not use your helmet in very hot conditions both batteries at the same time.
- Page 9 Servo Glas distributor. Your Servore helmet is a precision Thank you for purchasing a Servore product. If you have any questions regarding this engineered professional protection product and must be maintained or any other Servore product please contact your authorized Servo Glas distributor.
Need help?
Do you have a question about the SERVO GLAS 4000 and is the answer not in the manual?
Questions and answers