Replacing the Primary Hard Drive
The hard drive that is in the hard drive bay is the primary hard
drive. Remove it only after the notebook is properly shut down.
Ä
CAUTION: To prevent system lockup and loss of information:
■
Shut down the notebook before removing the hard drive from the
hard drive bay. Do not remove the hard drive while the notebook is
on, in Standby, or in Hibernation.
■
If you are not sure whether the notebook is in Hibernation, turn the
notebook on by pressing the power button. Then shut down the
notebook through the operating system.
To remove the primary hard drive:
1. Save your work.
2. Shut down the notebook and close the display.
3. Turn the notebook bottom side up.
4. Remove the hard drive security screw 1.
5. Remove the hard drive retaining screw 2.
Hardware Guide
Drives
4–5
Need help?
Do you have a question about the nc6000 - Notebook PC and is the answer not in the manual?
Questions and answers