The Display - Sony STR-DG810 Operating Instructions Manual

Changing the display
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press tile button, tile display
changes cyclically as follows.
All inputs except the FM and AM
band and XM Radio
Index name of the input a) -"'+ Selected input
-....+Sound field currently applied
FM and AM band
Preset station nanle a) -....+Frequency -....+Sound
field currently applied
XM Radio
Channel name --+ Channel number--+
Category name --+ Artist name/Feature --+
Song/program title --+ Sound field currently
applied
a/index name appears only when you have assigned
one to tile input or preset station (page 62, 76).
Index name does not appear when only blank
spaces have been entered, or it is tile same as tile
input name.
Usingthe SleepTimer
You can set the receiver to turn off
automatically at a specified time.
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
2-00-0{1 --* 1-30-00 --+ 1-00-00 --+ 0-30-00
--* OFF
When sleep timer is activated, the display
dims.
Note
If vo/1 press :lily btltlons
on
tile remote
or
receiver
after the display dims. the display brightens up.
After :1while, the display dims again if no button is
pressed.
Tip _"
To check tile l'emaining time before the receiver
turns off, press SLEEP. The remaining time appears
O
on the display. If you press SLEEP again, the sleep •
timer will be canceled.
77us