Mute; Ringer Mute; Call Waiting; Find Handset - VTech Dect 6.0 CS6219 User Manual

Telephone operation

Mute

The mute function allows you to hear the other party but the
other party cannot hear you.
During a call, press MUTE/REMOVE on the handset.
1.
The handset screen shows MUTED for a few seconds
and appears until the mute function is turned off.
MUTE
Press MUTE/REMOVE again to resume the
2.
conversation. The handset screen temporarily shows
MICROPHONE ON.

Ringer mute

When the telephone is ringing, press OFF/CLEAR or
MUTE/REMOVE to temporarily silence the ringer without
disconnecting the call. The next call rings normally.

Call waiting

If you subscribe to call waiting service from your telephone service provider,
you hear an alert tone if there is an incoming call while you are on another call.
/FLASH to answer the new incoming call. Press
• Press
to return to the original call.

Find handset

Use this feature to page all system handsets.
Press FIND HANDSET on the telephone base. All idle
1.
handsets ring and the screens show ** PAGING **.
2. To end paging, press
(0-9, #, *), or press FIND HANDSET on the telephone
base.
/FLASH,
, any dialing keys
12
PHONE 0:00:00
MUTED
MUTE
RINGER MUTE
/FLASH again