Advertisement
The highly
sensitive
Directional
Stereo Mica'ophone
DM-50
has been designed
exclusively
fbr carncorders
equipped
with an advanced
accessory
shoe ,J'_',
It is
7
powered
by the carncorder
s power supply, Use during cassette recording
or audio
dubbing ( _ 93),
Refer m the DM-50's instructions fbr further dePails,
T'um the camcorder's
power off befbre attaetfing/removing
the microphone,
1. Sfide the microphone
onto the accessory
shoe and tighten with the
shoe lock.
• Slide in rite direction of the arrow on rite bottom of the _rfic_'ophone until it
clicks securely into place,
• Make sure that rite m]ca'ophone does not _rne disconnected when turning
rite shoe lock,
l
2. Set the e_tme_rder
to TAPE
CAMERA
mode.
• [] (Connection) appears in the display,
3. Set the microphone's
dlrectivity
switeh.
SHOTGUN: Clearly picks up sound _ving
from the front of the ruicmphone
(monaurel),
STEREOI:
Picks up sound arriving from the front of, as well as sound
s_unding
the m]cnrophone.
STEREO2:
Picks up sound surrounding the microphone in a wider range than
STEREO 1,
[]
Notes:
• Never cm'ry the carn_rder
holding the _rfic_'ophone,
• Do not u_ any other external mica'ophones wlfle the DM-50 is connected _ the
'advanced accessory shoe,
71
Advertisement
