NOTE:
when you install USB storage, there is display USB Mass Device Configuration item, from this
item, you can get some information about the device, some information you can configure it if you
need.
Table 14
USB Configuration submenu fields
Field
USB Ports
USB BIOS Support
USB 2.0 Controller
Mode
BIOS EHCI Hand-
Off
PCI BUS Configuration submenu
Figure 20
PCI BUS Configuration Menu
Description
This setting allows the use of the USB function. This is the default
setting.
This setting makes the onboard USB function unavailable.
Enables support for legacy USB. AUTO option disables legacy
support if no USB devices are connected.
Disables support for legacy USB.
This setting allows the use of USB ports transfer data in 480Mbps.
This is the default setting
This setting allows the use of USB ports transfer data in 12Mbps.
Set this value can support the EHCI-off, this is default value.
Set this value not allow support the EHCI-off.
Options
Enabled
Disabled
Enabled
Disabled
Hi Speed
Full Speed
Enabled
Disabled
Contents 22