Connecting A Component Video Source - Epson PowerLite 1705c User Manual

note
Be sure your video player is
not an RGB video source.
If you select the wrong
source, image quality may
suffer. Check your video
player's documentation.
Also, make sure the
Computer Input setting in
the Signal menu is set to
Auto or Component Video
(see page 119).
Connecting to Computers, Cameras, and Other Equipment
42

Connecting a Component Video Source

You will need a component-to-VGA video cable or a component
video-to-VGA adapter for this connection. You can order the
component-to-VGA cable (ELPKC19) from Epson; see page 14 for
more information.
1. Locate a component-to-VGA video cable or adapter.
2. Connect the cable to your player and the blue
Computer/Component Video
Component-to-
VGA adapter
3. If you want to play sound through the projector, see page 45 for
instructions on connecting audio cables.
4. If you don't need to make any other connections, see page 17 for
instructions on turning on the projector and adjusting the image.
Once the projector is turned on, select the image source: press the
button on the remote control or press the
Search
button on the projector's control panel repeatedly until
Search
the image appears.
connector on the projector.
Component-to-VGA cable
(ELPKC19)
Source