Leaving The Setup Program - Epson Apex 20020, 20040 User Manual

The time and date are set automatically as soon as you press
after typing the time and date; you do not need to save
Enter
these settings. Therefore, if you change either setting in the
Setup program and then exit the program without saving your
changes, the new time or date still takes effect.

Leaving the Setup Program

When you finish setting the options in the Setup menu,
highlight the
summary such as this:
Memory size
Display type
Coprocessor
Mass storage
Real-time clock
Check the list to see if all the information is correct. If any
setting is incorrect, highlight
press
Enter.
the setting, as necessary.
option and press
Exit
Main
Expansion
Drive A:
Drive B:
Drive C:
Drive D:
Time
Date
C h a n g e S e t t i n g s
E x i t w i t h o u t s a v i n g
** EXIT AND SAVE **
The main Setup menu appears and you can change
Enter. You
640KB
0 KB
Color/graph. 80 col
80287 not installed
1.2 MB
None
Type 11
None
13:30:00
08-30-1989
Change settings
see a
and