Chime Tune Setting - GE 19208 Installation Instructions Manual

The wireless door chime Kit has two components:
Chime (receiver)

Chime Tune Setting

All wireless chimes may have more than one push button. The chime tune for
each push button is set with dip switches 1-3.
Single Push Button Kit: If you purchased a kit with a single push button, the
chime tune will be set to Ding Dong from the factory.
Dual Push Button Kit: If you purchased a kit with two push buttons, one push
button will be set to Ding Dong and the other push button will be set to
Westminster from the factory.
The following instructions explain how to change the tune on any wireless push
button.
1. Remove the battery from the push button transmitter.
2. Locate the 3 dip switches shown below.
3. Select the desired chime sound from the table below.
Chime Sound Table
Position
Westminster
Ding Dong
Knock
Bronze Chime
Cuckoo Clock
Foghorn
Gong
ON: Switch On
OFF: Switch Off
Push-Button (Transmitter).
1 2
ON OFF
OFF ON
OFF OFF
ON ON
ON OFF
OFF ON
ON ON
3
OFF
OFF
ON
OFF
ON
ON
ON