SPT SP-3618 Instruction Manual
  1. Manuals
  2. Brands
  3. SPT Manuals
  4. Water Dispenser
  5. SP-3618
  6. Instruction manual
SPT SP-3618 Instruction Manual

SPT SP-3618 Instruction Manual

Automatic dispensing hot water pot with multi-temperature function
Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
Instruction Manual
Automatic Dispensing Hot
Water Pot with
Multi-temperature Function
SP-5016
SP-3618: 3.6L
SP-5016: 5.0L
(Stainless Steel)
Thank you for purchasing Sunpentown Hot
Water Pot. Please read this manual
thoroughly and keep for future reference.
Image
Of
FEATURES
Automatic Dispensing
One-Touch
Dispense
5 Temperature Settings
Multi-temp
selections
208°F
For tea, coffee, instant noodle.
194°F
Keep warm around 194°F.
176°F
Keep warm around 176°F.
140°F
For infant formula.
COOL
Water temp will continuously
decrease till cool
* Based on full pot of water. Ambient temperature of 68°F.
Picture explanation
Note on usage and
maintenance.
Note
Reboil Function
Cleaning Function
Citric
acid
Explains sound
emitted by the unit
Alarm
during usage.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-3618 and is the answer not in the manual?

Questions and answers

Related Manuals for SPT SP-3618

Summary of Contents for SPT SP-3618

  • Page 1 FEATURES Instruction Manual Automatic Dispensing Reboil Function Automatic Dispensing Hot Water Pot with One-Touch Dispense Multi-temperature Function 5 Temperature Settings Cleaning Function Multi-temp Image selections 208°F For tea, coffee, instant noodle. 194°F Keep warm around 194°F. Citric acid 176°F Keep warm around 176°F. 140°F For infant formula.

  • Page 2: Important Safeguards

    Important Safeguards Warning. To prevent possible electric shock and injury: Do not fill READ ALL INSTRUCTIONS BEFORE USE Open lid with caution, do water above not use force. When using an electrical the FULL appliance, basic precautions indicator. Do not cover the should always be followed, SYMBOLS steam outlet.

  • Page 3: Parts Identification

    Notice Parts Identification Do not use other than Be cautious of hot steam the supplied power when opening the lid. cord. Plug in dedicated Do not add water during socket. the boiling process. Unplug from power Never turn the unit upside source when not in use.

  • Page 4: Adding Water

    Operating Instructions Adding Water 1. Open lid and add water. 2. Close lid firmly. Opening and closing the lid Removing and attaching the lid To open: press down with thumb To remove: press down on the Release 3. Connect power. and pull latch upwards.

  • Page 5: Temperature Setting

    Re-Boil Temperature Setting 5 temperature settings: 208°F, • Cool Setting: unit will boil water To reboil water, press the REBOIL button. Unit will beep and 194 °F, 176 °F, 140 °F, and Cool. then stop heating. Pressing the Re- Boil indicator will lit. boil button will reboil water.

  • Page 6: Standby Mode

    Adding Water Dry Boil • Add water when water level falls within the red section on the Water Level Indicator. • Unit will automatically begin to boil after adding water. If not, press the Reboil button. If there is no water or if water level is low, Dry boil indicator Press Reboil button...

  • Page 7: Replacing Worn Parts

    The rubber gasket on the lid will wear over time and will need to be period of time, clean unit and replaced periodically. Contact Sunpentown (www.spt-usa.com / 909- Power Cord allow unit to dry completely. 468-5288) to purchase replacement gaskets or for instruction to send •...

  • Page 8: Troubleshooting

    Troubleshooting PROBLEM CAUSE REMEDY No power Loose power Check connection at connection the unit and socket. Your Guarantee Cannot switch to Water level is too Add water. If this product is found to be faulty as a result of faulty materials or boil / reboil low.

This manual is also suitable for:

Sp-5016

Table of Contents