The S Paper Out Light Is Flashing Or On; A B Black Or A Color Ink Out Light Is Flashing Or On; The S And Plights Are Flashing - Epson 800 User Manual

Possible cause
Printing is stalled in Spool
Manager (Windows).
Printing is stalled in
Monitor2 (Macintosh).
The print heads are clogged
or the ink cartridges are too
old.

The S paper out light is flashing or on.

Possible cause
If flashing, paper is jammed.
If on, paper is used up or is
loaded incorrectly.

A B black or A color ink out light is flashing or on.

Possible cause
If flashing, the ink supply is
getting low.
If on, the ink cartridge is
empty.
The and lights are flashing.
S P
Possible cause
A carriage error has
occurred.
Solution
Delete the stalled print jobs in Spool Manager and resume
printing; see Chapter 4 for instructions.
Open the Extensions folder, EPSON folder, and Spool folder.
Then delete any queued files.
If the printer sounds like it's trying to print but doesn't feed paper,
clean the print heads; see Chapter 5 for instructions. If cleaning
doesn't help, replace the cartridges. For information on cartridge
life and replacement instructions, see Chapter 5.
Solution
Remove the paper and follow the guidelines for preventing jams
as described on page 6-14.
Load paper or remove the stack and reload it as described in
Chapter 2. Then press the E load/eject button to turn off the light
and resume printing.
Solution
You need to replace the indicated ink cartridge soon; see
Chapter 5 for instructions and make sure you have a new
cartridge.
You must replace the indicated ink cartridge now to be able to
print; see Chapter 5 for instructions.
Solution
Remove any paper in the printer. Press the
about 30 seconds. Then press it again. Turn the printer off, wait a
few seconds, and then turn it on and try printing again. If the error
is not cleared, contact EPSON as described in the Introduction.
6-9
Troubleshooting
E load/eject button for