Connecting A Serial Device - Epson ActionNote 4SLC2-50 User Manual

4. If the connector has retaining screws, tighten them by hand or
with a screwdriver.
5. Connect the other end of the cable to the printer. If the printer
interface has retaining clips, squeeze them gently until they
snap into place.
6. Connect the printer's power cable to a grounded (earthed)
electrical socket.

Connecting a Serial Device

You can use the
devices, such as a serial printer or plotter. You could also connect a
modem or pointing device, such as a trackball or mouse.
Note
You cannot use the
installed.
Follow these steps to connect a serial device:
1. Make sure both computer and the serial device are off.
COM 1
and/or COM 2 port to connect serial
COM 2
port if the internal fax/modem is
Connecting Optional Devices 4-5