Figure 2. Hard-Drive/SSD Indicators
1. drive activity indicator (green)
2. drive status indicator (green and amber)
Drive-Status Indicator Pattern
Blinks green two times per second
Off
Blinks green, amber, and off
Blinks amber four times per second
Blinks green slowly
Steady green
Blinks green three seconds, amber three
seconds, and off six seconds
Other Information You May Need
WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be
included within this document or as a separate document.
Getting Started Guide provides an overview of system features, setting up your system, and technical
•
The
specifications.
Rack Installation Instructions included with your rack solution describes how to install your system into a
•
The
rack.
Dell PowerEdge M1000e Enclosure Owner's Manual provides information about enclosure features and
•
The
describes how to troubleshoot the enclosure and install or replace the enclosure's components.
•
The
Dell Chassis Management Controller User's Guide provides information on installing, configuring and using
the Chassis Management Controller (CMC).
8
Condition
Identifying drive or preparing for removal
Drive ready for insertion or removal
NOTE: The drive status indicator remains off until all hard drives
are initialized after system power is applied. Drives are not
ready for insertion or removal during this time.
Drive predicted failure
Drive failed
Drive rebuilding
Drive online
Rebuild aborted