Advertisement
Quick Links
e
Exhaust Fan User's Guide
Item Stock Number(s): BF120, BF150, BF150A
IMPORTANT INSTRUCTIONS -
OPERATING MANUAL
READ AND SAVE THESE INSTRUCTIONS
READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED.
PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH
INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE!
RETAIN INSTRUCTIONS FOR FUTURE REFERENCE.
When using electrical appliances, basic precautions should always be followed to reduce
the risk of fire, electric shock and injury to person, including the following:
1.
Read all instructions before installing or using exhaust fan.
2.
Use this unit only in the manner intended by the manufacturer.
If you have questions, contact the manufacturer.
3.
Before servicing or cleaning the unit, switch power off at
service panel and lock the service disconnecting means to
prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten
a prominent warning device, such as a tag, to the service
panel.
SAVE THESE INSTRUCTIONS
210572118 Rev. B 5-06
a
GENERAL SAFETY INFORMATION
4.
Installation work and electrical wiring must be done by qualified
person(s) in accordance with all applicable codes and
standards, including fire-related construction.
5.
Sufficient air is needed for proper combustion and exhausting
of gases through the flue (chimney) of fuel burning equipment to
prevent back drafting. Follow the heating equipment
manufacturer's guideline and safety standards such as those
published by the National Fire Protection Association (NFPA)
and the American Society for Heating, Refrigeration, and Air
Conditioning Engineers (ASHRAE), and the local code authorities.
www.geelectrical.com
BF120, BF150, BF150A
1 of 4
Advertisement
Related Manuals for GE BF120, BF150, BF150A
Summary of Contents for GE BF120, BF150, BF150A
-
Page 1: Read And Save These Instructions
BF120, BF150, BF150A Exhaust Fan User’s Guide Item Stock Number(s): BF120, BF150, BF150A IMPORTANT INSTRUCTIONS - OPERATING MANUAL READ AND SAVE THESE INSTRUCTIONS READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! RETAIN INSTRUCTIONS FOR FUTURE REFERENCE. -
Page 2: Installation Instructions
GENERAL SAFETY INFORMATION Select the most convenient electrical knockout and remove using a straight- (Continued) blade screw driver (Figure 2). CAUTION: FOR GENERAL VENTILATING USE ONLY. DO NOT USE TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS AND VAPORS. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other hidden utilities. -
Page 3: Troubleshooting Guide
SECTION 6 Ducting Completing the Installation Reinstall the fan’s venturi by holding it at approximately a 45 degree angle, hook the two tabs on the venturi into the slots on the housing Duct and secure in place by tightening the venturi screw. Rotate the Collar blower wheel by hand to ensure it spins freely. - Page 4 God. This warranty contains the sole and exclusive warranty of GE for claims based on defects in these products. Upon the expiration of the warranty period, all such liability shall terminate. There are no other warranties, whether written, oral, implied or statutory. NO IMPLIED STATUTORY WARRANTY OF MERCHANTABILITY OR FITNESS FOR PARTICULAR PURPOSE SHALL APPLY.