Table of Contents
Advertisement
6.
After installation is complete, click Finish.
To install EPSON Photo!3, go to the next section.
Installing EPSON Photo!3 for serial cable users
When the camera and computer are connected with a
serial cable, follow the steps below to install EPSON
Photo!3.
1.
Turn on your computer and insert the included
CD for Windows in your computer's CD-ROM
drive.
If a dialog box appears asking you to select a
language, click the appropriate language, then
click OK.
2.
An introductory screen appears on your monitor.
Click the Add Software icon.
3.
A dialog box with a list of software appears. Any
software with a check mark next to it will be
installed in your PC. Click a software name to
remove or add a check mark.
Make sure there is a check mark next to EPSON
Photo!3.
4.
Click OK. Then follow the on-screen instructions.
5.
After installing EPSON Photo!3, click Finish.
6.
The installation process automatically begins for
any software you selected in addition to EPSON
Photo!3 in step 3. Follow the on-screen
instructions.
To install more software, go to the next section.
Installing EPSON Photo File Uploader3 and other
software
In addition to EPSON Photo!3, your software CD
contains other software to expand the capabilities of
your camera, such as EPSON Photo File Uploader3.
Follow the steps below to install the software of your
choice. See your software documentation for a
description of the available software.
1.
Make sure EPSON Photo!3 is already installed. If
not, see "Installing EPSON Photo!3 for USB users"
on page 1-6 and "Installing EPSON Photo!3 for
serial cable users" on page 1-7.
2.
If necessary, repeat steps 1 and 2 in "Installing
EPSON Photo!3 for serial cable users" on page 1-7.
1-7
Installing the Software
1
Advertisement
Table of Contents
