Table of Contents
Advertisement
Thank you for purchasing this Panasonic product.
■ Before operating this product, please read the instructions carefully and save this manual
for future use.
■ Before using your projector, be sure to read "Read this first!" ( x pages 2 to 8).
Operating Instructions
DLP
Projector
TM
Model No.
Functional Manual
Commercial Use
PT-RZ370U
PT-RW330U
ENGLISH
TQBJ0490
Advertisement
Table of Contents
Related Manuals for Panasonic PT-RW330U
Summary of Contents for Panasonic PT-RW330U
-
Page 1: Operating Instructions
PT-RZ370U Model No. PT-RW330U Thank you for purchasing this Panasonic product. ■ Before operating this product, please read the instructions carefully and save this manual for future use. ■ Before using your projector, be sure to read “Read this first!” ( x pages 2 to 8). -
Page 2: Read This First
Read this first! Read this first! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DONOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. Power Supply: This Projector is designed to operate on 100 V - 240 V, 50 Hz/60 Hz AC, house current only. CAUTION: The AC power cord which is supplied with the projector as an accessory can only be used for power supplies up to 125 V. - Page 3 To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer and/or peripheral devices. Any changes or modifications not expressly approved by Panasonic Corp. of North America could void the user’s authority to operate this device. NOTIFICATION (Canada) This class B digital apparatus complies with Canadian ICES-003.
- Page 4 Read this first! WARNING: „ POWER The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the following problems occur, cut off the power supply immediately. Continued use of the projector in these conditions will result in fire or electric shock. z If foreign objects or water get inside the projector, cut off the power supply.
- Page 5 If liquid enters inside of the projector, consult your dealer. z Particular attention must be paid to children. Use the ceiling mount bracket specified by Panasonic. Using the ceiling mount bracket other than the specified one will result in falling accidents.
- Page 6 Read this first! WARNING: „ ACCESSORIES Do not use or handle the batteries improperly, and refer to the following. Failure to observe this will cause burns, batteries to leak, overheat, explode or catch fire. z Use AA/R6/LR6 batteries. z Do not use unspecified batteries. z Do not use chargeable batteries.
- Page 7 Read this first! CAUTION: „ POWER When disconnecting the power cord, be sure to hold the power plug and power connector. If the power cord itself is pulled, the lead will become damaged, and fire, short-circuits or serious electric shocks will result.
- Page 8 Read this first! Brazil Only Brasil Apenas „ Manuseio de baterias usadas BRASIL Após o uso, as pilhas e /ou baterias poderão ser entregues ao estabelecimento comercial ou rede de assistência técnica autorizada. Cobrir os terminais positivo (+) e negativo (-) com uma fita isolante adesiva, antes de depositar numa caixa destinada para o recolhimento.
- Page 9 Trademarks f SOLID SHINE is a trademark of Panasonic Corporation. f Windows , Windows Vista , and Internet Explorer are registered trademarks or trademarks of Microsoft Corporation in the ® ® ® United States and other countries. f Mac, Mac OS, OS X, and Safari are registered trademarks of Apple Inc. in the United States and other countries.
-
Page 10: Features Of The Projector
Features of the Projector Quick Steps For details, refer to the corresponding pages. 1. Set up the projector. Easy setup and improved serviceability ( x page 24) A highly flexible setup is achieved with a 2x zoom lens, wide range of the lens shift, and 2. -
Page 11: Table Of Contents
Contents Contents Be sure to read “Read this first!” from page 2. Read this first! ..........2 Operating with the remote control ......37 Using the AV mute function ........37 Using the Freeze function ........37 Chapter 1 Preparation Switching the input ..........38 Precautions for use .......... - Page 12 [DISPLAY OPTION] menu ........59 [NETWORK] menu ........... 88 [COLOR MATCHING] ........... 59 [DIGITAL LINK MODE] ......... 88 [SCREEN SETTING] (only for PT-RW330U)..60 [DIGITAL LINK SETUP] ........88 [AUTO SIGNAL] ........... 61 [DIGITAL LINK STATUS] ........89 [AUTO SETUP]............. 61 [NETWORK SETUP] ..........
-
Page 13: Chapter 1 Preparation
Preparation Chapter 1 This chapter describes things you need to know or check before using the projector. ENGLISH - 13... -
Page 14: Precautions For Use
Chapter 1 Preparation — Precautions for use Precautions for use Cautions when transporting f When transporting the projector, hold it securely by its bottom and avoid excessive vibration and impacts. Doing so may damage the internal components and result in malfunctions. f Do not transport the projector with the adjustable feet extended. -
Page 15: Security
Chapter 1 Preparation — Precautions for use r Cautions when setting up the projector f To install and use the projector via a method that does not use the adjustable feet in a floor standing installation, fix the projector using the four screw holes for ceiling mounting (as shown in the figure). (Screw diameter: M4, tapping depth inside the set: 10 mm (13/32"), torque: 1.25 ±... -
Page 16: Digital Link
Chapter 1 Preparation — Precautions for use f Panasonic Corporation or its affiliate companies will never ask for your password directly. Do not divulge your password in case you receive such inquiries. f The connecting network must be secured by a firewall, etc. -
Page 17: Accessories
Chapter 1 Preparation — Precautions for use Accessories Make sure that the following accessories are provided with your projector. Numbers enclosed in < > show the number of accessories. Wireless remote control unit <1> CD-ROM <1> (N2QAYB000812) (TXFQB02VLF1) AA/R6 or AA/LR6 battery <2> Power cord <1>... -
Page 18: Start-Up Display
If you press the <RETURN> button in the initial setting (display language) screen, you can go back to the initial setting (display language) screen. f [SCREEN FORMAT] and [SCREEN POSITION] can only be set on PT-RW330U. 18 - ENGLISH... -
Page 19: About Your Projector
Chapter 1 Preparation — About your projector About your projector Remote control Remote control indicator <ID SET> button Flashes if any button in the remote control is pressed. Sets the ID number of the remote control to use for a system using multiple projectors. -
Page 20: Projector Body
Chapter 1 Preparation — About your projector Projector body Lens shift lever Adjusts the projection position. Air intake port 10 Air exhaust port 11 Remote control signal receiver (rear) 12 Security slot This security slot is compatible with the Kensington security cables. -
Page 21: Control Panel
Chapter 1 Preparation — About your projector r Control panel Power < v / b > button <MENU> button Sets the projector to the state where the projector is switched Displays the main menu. off (standby mode) when the <MAIN POWER> switch on the <INPUT SELECT>... -
Page 22: Using The Remote Control
Chapter 1 Preparation — Using the remote control Using the remote control Inserting and removing the batteries (ii) Fig. 1 Fig. 2 Open the cover. (Fig. 1) Insert the batteries and close the cover (insert the m side first). (Fig. 2) f When removing the batteries, perform the steps in reverse order. -
Page 23: Chapter 2 Getting Started
Getting Started Chapter 2 This chapter describes things you need to do before using the projector such as the setup and connections. ENGLISH - 23... -
Page 24: Setting Up
Chapter 2 Getting Started — Setting up Setting up Projection method You can use the projector with any of the following four projection methods. Select the appropriate method depending on the environment. Mounting on the ceiling and projecting forward Setting on a desk/floor and projecting from rear (Using the translucent screen) Menu item Method... -
Page 25: Screen Size And Throw Distance
Chapter 2 Getting Started — Setting up Screen size and throw distance Refer to the following figures and table describing projection distances to install the projector. Image size and image position can be adjusted in accordance with the screen size and screen position. L (LW/LT) Projection distance (m) Image height (m) -
Page 26: Adjusting Adjustable Feet
Chapter 2 Getting Started — Setting up For PT-RW330U (The dimensions of the following table contain a slight error.) (Unit: m) Projection screen 4:3 aspect ratio 16:9 aspect ratio 16:10 aspect ratio size Min. projection Max. projection Min. projection Max. projection Min. -
Page 27: Connecting
Chapter 2 Getting Started — Connecting Connecting Before connecting f Before connecting, carefully read the operating instructions for the external device to be connected. f Turn off the power of all devices before connecting cables. f Take note of the following points before connecting the cables. Failure to do so may result in malfunctions. g When connecting a cable to a device connected to the projector or the projector itself, touch any nearby metallic objects to eliminate static electricity from your body before performing work. -
Page 28: Connecting Example: Av Equipment
Chapter 2 Getting Started — Connecting <HDMI IN> terminal pin assignments and signal names Outside view Pin No. Signal name Pin No. Signal name T.M.D.S data 2+ (11) T.M.D.S clock shield T.M.D.S data 2 shield (12) T.M.D.S clock- Even-numbered pins (2) to (18) T.M.D.S data 2- (13) (18) -
Page 29: Connecting Example: Computers
Chapter 2 Getting Started — Connecting Connecting example: Computers Attention f When connecting the projector to a computer or an external device, use the power cord supplied with each device and commercially available shielded cables. f Use a commercial DVI-D cable with a ferrite core. Note f For an HDMI cable, use an HDMI High Speed cable that conforms to HDMI standards. - Page 30 LAN communication. Please note that we do not support the use of the projector outside the maximum transmission distance. f With some exceptions, operation with twisted-pair-cable transmitters of other companies is not guaranteed. For support of devices of other companies, refer to Panasonic website (http://panasonic.net/avc/projector/). 30 - ENGLISH...
-
Page 31: Chapter 3 Basic Operations
Basic Operations Chapter 3 This chapter describes basic operations to start with. ENGLISH - 31... -
Page 32: Switching On/Off The Projector
Chapter 3 Basic Operations — Switching on/off the projector Switching on/off the projector Connecting the power cord Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed easily. Confirm that the <MAIN POWER> switch is on the <OFF> side before connecting the power cord. For details of power cord handling, refer to “Read this first!”... -
Page 33: Switching On The Projector
Chapter 3 Basic Operations — Switching on/off the projector Indicator status Status The main power is switched off. The power is switched off (in standby mode). [STANDBY MODE] is set to [NORMAL]. Projection will start when the power < v / b > button is pressed. Flashing f The projector may not operate when the temperature indicator <TEMP>... -
Page 34: Making Adjustments And Selections
Chapter 3 Basic Operations — Switching on/off the projector Making adjustments and selections It is recommended that images are projected continuously for at least 30 minutes before the focus is adjusted. Set the initial settings. (x page 18) f The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [ALL USER DATA] ( x page 81) in [INITIALIZE] is executed. -
Page 35: Projecting
Chapter 3 Basic Operations — Projecting Projecting Check the external device connections ( x page 27) and the power cord connection ( x page 32), and turn on the projector ( x page 33) to start projecting. Select the video for projection, and adjust appearance of the projected image. Selecting the input signal Select an input signal. -
Page 36: Adjustment Range By The Lens Position Shift (Optical Shift)
Projection position can be adjusted with the optical axis shift based on the standard projection position in the range shown in the following figures. PT-RZ370U PT-RW330U * The numerical values in the preceding diagrams represent a case in which the projector is set on a desk/floor. Note f Set up the projector in front of the screen and adjust the lens shift lever to the center to obtain the optimal screen. -
Page 37: Operating With The Remote Control
Chapter 3 Basic Operations — Operating with the remote control Operating with the remote control Using the AV mute function If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the audio and video temporarily. -
Page 38: Switching The Input
Chapter 3 Basic Operations — Operating with the remote control Switching the input The input for projection can be switched. button Press the input selection (<COMPUTER>, <DVI-I>, <VIDEO>, <DIGITAL LINK>, <HDMI>) buttons. f This operation can be also performed using the <INPUT SELECT> button on the control panel. <COMPUTER>... -
Page 39: Using The Function Button
Chapter 3 Basic Operations — Operating with the remote control Using the Function button Frequently used operations can be assigned to the buttons from <FUNC1> to <FUNC3> on the remote control to be used as simple shortcut buttons. buttons Press the <FUNC1> to <FUNC3> buttons. When assigning operations to the buttons from <FUNC1>... -
Page 40: Chapter 4 Settings
Settings Chapter 4 This chapter describes the settings and adjustments you can make using the on-screen menu. 40 - ENGLISH... -
Page 41: Menu Navigation
Chapter 4 Settings — Menu navigation Menu navigation The on-screen menu (Menu) is used to perform various settings and adjustments of the projector. Navigating through the menu Operating procedure button Press the <MENU> button on the remote control or control panel. f The [MAIN MENU] screen is displayed. -
Page 42: Main Menu
Chapter 4 Settings — Menu navigation Note f Pressing the <RETURN> button or the <MENU> button when the menu screen is displayed returns to the previous menu. f Some items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannot be adjusted or used are shown in gray characters, and they cannot be selected. -
Page 43: Sub-Menu
Chapter 4 Settings — Menu navigation Main menu item Page [TEST PATTERN] [SIGNAL LIST] [SECURITY] [NETWORK] [DIGITAL LINK] Sub-menu The sub-menu of the selected main menu item is displayed, and you can set and adjust items in the sub-menu. [PICTURE] Sub-menu item Factory default Page... -
Page 44: Display Language
― [BACK COLOR] [BLUE] [STARTUP LOGO] [DEFAULT LOGO] [SUB MEMORY LIST] ― [FREEZE] ― [AV MUTE] ― *1 Only for PT-RW330U. [PROJECTOR SETUP] Sub-menu item Factory default Page [PROJECTOR ID] [ALL] [PROJECTION METHOD] [FRONT/FLOOR] [COOLING CONDITION] [FLOOR SETTING] [ECO MANAGEMENT] ―... -
Page 45: Signal List
Chapter 4 Settings — Menu navigation [TEST PATTERN] Details ( x page 82) [SIGNAL LIST] Details ( x page 83) [SECURITY] Sub-menu item Factory default Page [SECURITY PASSWORD] [OFF] [SECURITY PASSWORD CHANGE] ― [TEXT DISPLAY] [OFF] [TEXT CHANGE] ― [MENU LOCK] [OFF] [MENU LOCK PASSWORD] ―... -
Page 46: [Picture] Menu
Chapter 4 Settings — [PICTURE] menu [PICTURE] menu On the menu screen, select [PICTURE] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 47: [Brightness]
Chapter 4 Settings — [PICTURE] menu [BRIGHTNESS] You can adjust the dark (black) part of the projected image. Press as to select [BRIGHTNESS]. Press qw or the <ENTER> button. f The [BRIGHTNESS] individual adjustment screen is displayed. Press qw to adjust the level. Operation Adjustment Range... - Page 48 Chapter 4 Settings — [PICTURE] menu Note f When [COLOR MATCHING] ( x page 59) adjustment is set to other than [OFF], [COLOR TEMPERATURE] is fixed to [USER]. Adjusting desired white balance Press as to select [COLOR TEMPERATURE]. Press qw or the <ENTER> button. f The [COLOR TEMPERATURE] individual adjustment screen is displayed.
-
Page 49: [Daylight View]
Chapter 4 Settings — [PICTURE] menu Note f When a name is changed, display of the [USER] menu is also changed. [DAYLIGHT VIEW] You can correct the image to the optimal vividness even if it is projected under a bright light. Press as to select [DAYLIGHT VIEW]. -
Page 50: [System Selector]
Chapter 4 Settings — [PICTURE] menu [SYSTEM SELECTOR] The projector will automatically detect the input signal, but you can set the system method manually when an unstable signal is input. Set the system method matching the input signal. Press as to select [SYSTEM SELECTOR]. Press the <ENTER>... -
Page 51: [Position] Menu
Chapter 4 Settings — [POSITION] menu [POSITION] menu On the menu screen, select [POSITION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 52: [Aspect]
You can switch the aspect ratio of the image. The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] first. ( x page 60) [SCREEN SETTING] is available only on PT-RW330U. Press as to select [ASPECT]. -
Page 53: [Clock Phase]
Chapter 4 Settings — [POSITION] menu Note f When [ASPECT] is set to [NATIVE], [ZOOM] cannot be adjusted. When [ASPECT] is set to [NORMAL] Press as to select [ZOOM]. Press the <ENTER> button. f The [ZOOM] screen is displayed. Press as to select [MODE]. Press qw to switch [MODE]. -
Page 54: [Keystone]
Chapter 4 Settings — [POSITION] menu [KEYSTONE] You can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted. Press as to select [KEYSTONE]. Press qw or the <ENTER> button. f The [KEYSTONE] individual adjustment screen is displayed. Press qw to adjust. -
Page 55: [Advanced Menu] Menu
Chapter 4 Settings — [ADVANCED MENU] menu [ADVANCED MENU] menu On the menu screen, select [ADVANCED MENU] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 56: [Input Resolution]
Chapter 4 Settings — [ADVANCED MENU] menu Blanking correction Item Operation Adjustment Range The blanking zone Press the w button. moves to the right. Left side of the [LEFT] screen The blanking zone Press the q button. moves to the left. Left and right: 0 (lower limit) The blanking zone... -
Page 57: [Frame Response]
Chapter 4 Settings — [ADVANCED MENU] menu [FRAME RESPONSE] If 1 080/60i, 1 080/50i, or 1 080/24sF signals are input, the video frame delay can be shortened by simplifying video processing. Press as to select [FRAME RESPONSE]. Press qw to switch [FRAME RESPONSE]. f The items will switch each time you press the button. -
Page 58: [Display Language] Menu
Chapter 4 Settings — [DISPLAY LANGUAGE] menu [DISPLAY LANGUAGE] menu On the menu screen, select [DISPLAY LANGUAGE] from the main menu, and display the sub- menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f Press as to select a language, and press the <ENTER>... -
Page 59: [Display Option] Menu
Chapter 4 Settings — [DISPLAY OPTION] menu [DISPLAY OPTION] menu On the menu screen, select [DISPLAY OPTION] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 60: [Screen Setting] (Only For Pt-Rw330U)
A difference in the color coordinates of target data and measurement values obtained from an instrument may occur for certain instruments and measurement environments used. [SCREEN SETTING] (only for PT-RW330U) Set the screen size. When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessary for the screen in use. -
Page 61: [Auto Signal]
Chapter 4 Settings — [DISPLAY OPTION] menu [AUTO SIGNAL] Set automatic execution of auto setup. The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control on each occasion if you input unregistered signals frequently at meetings, etc. Press as to select [AUTO SIGNAL]. -
Page 62: [Dvi-I In]
Chapter 4 Settings — [DISPLAY OPTION] menu [DVI-I IN] Switch the setting when the external equipment is connected to the <DVI-I IN> terminal of the projector and the image is not projected correctly. When digital signals are input Press as to select [DVI-I IN]. Press the <ENTER>... -
Page 63: [Hdmi In]
Chapter 4 Settings — [DISPLAY OPTION] menu [HDMI IN] Switch the setting when an external device is connected using the <HDMI IN> terminal of the projector and the image is not projected correctly. Press as to select [HDMI IN]. Press the <ENTER> button. f The [HDMI IN] screen is displayed. - Page 64 Chapter 4 Settings — [DISPLAY OPTION] menu Press qw to switch [OSD POSITION]. f The items will switch each time you press the button. Sets to the center of the screen. Sets to the bottom center of the screen. Sets to the upper right of the screen. Sets to the right center of the screen.
-
Page 65: [Closed Caption Setting] (Ntsc Input Only)
Chapter 4 Settings — [DISPLAY OPTION] menu Setting [INPUT GUIDE] Set display of the input guide (display of the currently selected input terminal name, signal name, and memory number) in the position set by the [OSD POSITION]. Press as to select [ON-SCREEN DISPLAY]. Press the <ENTER>... -
Page 66: [Back Color]
The entire projection area appears blue. [BLACK] The entire projection area appears black. [DEFAULT LOGO] The Panasonic logo is projected. [USER LOGO] The image registered by the user is projected. Note f To create and register the image for [USER LOGO], “Logo Transfer Software” included in the supplied CD-ROM is required. -
Page 67: [Sub Memory List]
Chapter 4 Settings — [DISPLAY OPTION] menu [SUB MEMORY LIST] The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by the frequency or format of the synchronization signal source. Use this function when you need to adjust the image quality such as switching of the aspect ratio or white balance by the same synchronization signal source. -
Page 68: [Av Mute]
Chapter 4 Settings — [DISPLAY OPTION] menu [AV MUTE] Image and audio are muted when the projector is not used for a certain period of time. Press as to select [AV MUTE]. Press the <ENTER> button. f Press the <RETURN> button to release. Note f The power indicator <ON (G)/STANDBY (R)>... -
Page 69: [Projector Setup] Menu
Chapter 4 Settings — [PROJECTOR SETUP] menu [PROJECTOR SETUP] menu On the menu screen, select [PROJECTOR SETUP] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 70: [Cooling Condition]
Chapter 4 Settings — [PROJECTOR SETUP] menu [COOLING CONDITION] Change the fan control depending on the direction of projection. Set [COOLING CONDITION] correctly in accordance with the direction of projection referencing the following figure. Using the light source with incorrect settings may shorten its life. Press as to select [COOLING CONDITION]. -
Page 71: [Off]
Chapter 4 Settings — [PROJECTOR SETUP] menu Setting [AUTO POWER SAVE] Set whether to enable the three functions [AMBIENT LIGHT DETECTION], [SIGNAL DETECTION], and [AV MUTE DETECTION]. Press as to select [ECO MANAGEMENT]. Press the <ENTER> button. f The [ECO MANAGEMENT] screen is displayed. Press as to select [AUTO POWER SAVE]. -
Page 72: [Schedule]
Chapter 4 Settings — [PROJECTOR SETUP] menu Press qw to switch [STANDBY MODE]. f The items will switch each time you press the button. [ECO] Use this setting to reduce power consumption during standby. [NORMAL] Use this setting to use the network function during standby. Note f When set to [ECO], network functions are not available during standby. - Page 73 Sets the volume. *1 When the Panasonic twisted-pair-cable transmitter (such as optional digital interface box (Model No.: ET-YFB100G)) is connected to the projector, its input name is reflected to [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is disabled.
-
Page 74: [Initial Startup]
Chapter 4 Settings — [PROJECTOR SETUP] menu Press the <ENTER> button. f The command is fixed and ● is displayed at the left of the selected command. f After the command is fixed, press the <RETURN> button or the <MENU> button to close the detailed setting menu. Press as to select [STORE], and press the <ENTER>... -
Page 75: [Digital Link Input]
Note f When the Panasonic twisted-pair-cable transmitter (such as optional digital interface box (Model No.: ET-YFB100G)) is connected to the projector, its input name is reflected to [INPUT1] to [INPUT10] automatically. If an item where the input name is not reflected is selected, it is disabled. - Page 76 [ODD] Using existing projector control commands Set each item when controlling the projector from a computer with control commands of the previously purchased Panasonic projector. Existing Panasonic projector control software and other software can still be used. Press as to select [RS-232C].
-
Page 77: [Function Button]
Chapter 4 Settings — [PROJECTOR SETUP] menu Note f Refer to “<SERIAL IN> terminal” ( x page 118). f When [DIGITAL LINK] is selected, communication is only available using the serial terminal when the relevant device (such as an optional digital interface box (Model No.: ET-YFB100G)) is connected to the <DIGITAL LINK/LAN>... - Page 78 Chapter 4 Settings — [PROJECTOR SETUP] menu Setting the audio output during standby Press as to select [AUDIO SETTING]. Press the <ENTER> button. f The [AUDIO SETTING] screen is displayed. Press as to select [IN STANDBY MODE]. Press qw to switch [IN STANDBY MODE]. f The items will switch each time you press the button.
-
Page 79: [Status]
Chapter 4 Settings — [PROJECTOR SETUP] menu [STATUS] Displays the status of the projector. Press as to select [STATUS]. Press the <ENTER> button. f The [STATUS] screen is displayed. Press qw to switch the pages. f The page will change each time you press the button. [INPUT] Displays the input terminal currently selected. -
Page 80: [Save All User Data]
Chapter 4 Settings — [PROJECTOR SETUP] menu Setting the date and time automatically Press as to select [DATE AND TIME]. Press the <ENTER> button. f The [DATE AND TIME] screen is displayed. Press as to select [ADJUST CLOCK]. Press the <ENTER> button. f The [ADJUST CLOCK] screen is displayed. -
Page 81: [Initialize]
Chapter 4 Settings — [PROJECTOR SETUP] menu [INITIALIZE] Return various setting values to their factory default settings. Press as to select [INITIALIZE]. Press the <ENTER> button. f The [SECURITY PASSWORD] screen is displayed. Enter a security password and press the <ENTER> button. f The [INITIALIZE] screen is displayed. -
Page 82: [Test Pattern] Menu
Chapter 4 Settings — [TEST PATTERN] menu [TEST PATTERN] menu On the menu screen, select [TEST PATTERN] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f Press qw to switch. [TEST PATTERN] Display the test pattern built-in to the projector. -
Page 83: [Signal List] Menu
Chapter 4 Settings — [SIGNAL LIST] menu [SIGNAL LIST] menu On the menu screen, select [SIGNAL LIST] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. r Registered signal details f A name can be set for each sub memory ( x page 67). -
Page 84: Deleting The Registered Data
Chapter 4 Settings — [SIGNAL LIST] menu Deleting the registered data Registered signals can be deleted. Press asqw to select the signal to delete. Press the <DEFAULT> button. f The [ENTRY SIGNAL DELETE] screen is displayed. f To cancel the deletion, press the <RETURN> button or the <MENU> button to return to the [REGISTERED SIGNAL LIST] screen. Press the <ENTER>... -
Page 85: [Security] Menu
Chapter 4 Settings — [SECURITY] menu [SECURITY] menu On the menu screen, select [SECURITY] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f When the projector is used for the first time Initial password: Press awsqawsq in order, and press the <ENTER>... -
Page 86: [Text Display]
Chapter 4 Settings — [SECURITY] menu [TEXT DISPLAY] Overlap the security message (text) over the projecting image. Press as to select [TEXT DISPLAY]. Press qw to switch [TEXT DISPLAY]. f The items will switch each time you press the button. [OFF] Hides the security message. -
Page 87: [Control Device Setup]
Chapter 4 Settings — [SECURITY] menu [CONTROL DEVICE SETUP] Enable/disable the button operations on the control panel and the remote control. Press as to select [CONTROL DEVICE SETUP]. Press the <ENTER> button. f The [CONTROL DEVICE SETUP] screen is displayed. Press as to select [CONTROL PANEL] or [REMOTE CONTROL]. -
Page 88: [Network] Menu
Chapter 4 Settings — [NETWORK] menu [NETWORK] menu On the menu screen, select [NETWORK] from the main menu, and select the item from the sub-menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. f After selecting the item, press asqw to set. -
Page 89: [Digital Link Status]
Chapter 4 Settings — [NETWORK] menu When the confirmation is displayed, select [OK] or [CANCEL], and press the <ENTER> button. Note f Not compatible with 10BaseT Full/Half. When the projector is connected directly via a twisted-pair-cable transmitter Press as to select [DIGITAL LINK SETUP]. Press the <ENTER>... -
Page 90: [Network Setup]
Chapter 4 Settings — [NETWORK] menu [NETWORK SETUP] Perform the initial setting of the network before using the network function. Press as to select [NETWORK SETUP]. Press the <ENTER> button. f The [NETWORK SETUP] screen is displayed. Press as to select an item, and change the settings according to the operation instructions of the menu. -
Page 91: [Network Status]
Chapter 4 Settings — [NETWORK] menu [NETWORK STATUS] Display the status of the projector network. Press as to select [NETWORK STATUS]. Press the <ENTER> button. f The [NETWORK STATUS] screen is displayed. Network connections The projector has a network function, and the following operations are available from the computer using the web control. f Setting and adjustment of the projector f Display of the projector status f Sending of E-mail messages when there is a problem with the projector... -
Page 92: Connecting To A Twisted-Pair-Cable Transmitter
After laying the cables, confirm that the [SIGNAL QUALITY] value in the [NETWORK] menu → [DIGITAL LINK STATUS] is displayed in green to indicate normal quality. ( x page 89) f With some exceptions, operation with twisted-pair-cable transmitters of other companies is not guaranteed. For support of devices of other companies, refer to Panasonic website (http://panasonic.net/avc/projector/). 92 - ENGLISH... -
Page 93: Accessing From The Web Browser
Enter the IP address set on the projector into the URL entry field of the web browser. Enter the user name and the password. f The factory default setting of the user name is user1 (user rights)/admin1 (administrator rights) and the password is panasonic (lower case). - Page 94 Chapter 4 Settings — [NETWORK] menu Descriptions of items Page tab [Detailed set up] Switches pages by clicking it. The [Detailed set up] page is displayed by clicking this item. [Status] [Change password] The status of the projector is displayed by clicking this item. The [Change password] page is displayed by clicking this item.
-
Page 95: Error Information Page
Chapter 4 Settings — [NETWORK] menu Error information page When [Error (Detail)] is displayed in the self-diagnosis display of the [Projector status] screen, click it to display the error details. f The projector may go into the standby status to protect the projector depending on the contents of the error. r Problem occurrence [FAILED] items Parameter Description... - Page 96 Chapter 4 Settings — [NETWORK] menu [Access error] page Click [Status] → [Access error]. The error log on the WEB server is displayed such as access to the pages that do not exist or access with unauthorized user names or passwords.
- Page 97 Chapter 4 Settings — [NETWORK] menu [Advanced control] page Click [Projector control] → [Advanced control]. [POSITION] [PICTURE] Operates items related to angle of view. Operates items related to image quality. [Network config] page Click [Detailed set up] → [Network config]. f Click [Network config] to display the [CAUTION!] screen.
-
Page 98: Adjust Clock] Page
Chapter 4 Settings — [NETWORK] menu [Ping test] page You can check whether the network is connected to the E-mail server, POP server, DNS server, etc. Click [Detailed set up] → [Ping test]. [Input IP address] Example of display when the connection has succeeded Enter the IP address of the server to be tested. - Page 99 Chapter 4 Settings — [NETWORK] menu [E-mail set up] page When there is a problem, an email can be sent to preset email addresses (up to two addresses). Click [Detailed set up] → [E-mail set up]. [ENABLE] [MEMO] Select [Enable] to use the E-mail function. Enter information such as the location of the projector that notifies the sender of the E-mail.
- Page 100 Chapter 4 Settings — [NETWORK] menu [E-MAIL ADDRESS 2] [INTAKE AIR TEMPERATURE]: Enter the E-mail address to be sent when two E-mail addresses An E-mail message is sent when the air intake temperature has are to be used. reached the value set at the above field. [PERIODIC REPORT]: Leave it blank when two E-mail addresses are not to be used.
-
Page 101: Contents Of Mail Sent
Chapter 4 Settings — [NETWORK] menu Contents of mail sent Example of E-mail sent when E-mail is set The following E-mail is sent when the E-mail settings have been established. === Panasonic projector report(CONFIGURE) === Projector Type : RW330 Serial No... - Page 102 Chapter 4 Settings — [NETWORK] menu Example of the E-mail sent for an error The following E-mail is sent when an error has occurred. === Panasonic projector report(ERROR) === Projector Type : RW330 Serial No : SW1234567 ----- check system -----...
- Page 103 Chapter 4 Settings — [NETWORK] menu User name [Change password] page Click [Change password]. [Administrator] [Next] Used to change the setting of [Administrator]. Used to change the setting of the password. [User] Used to change the setting of [User]. [Administrator] account [Account] Displays the account to change.
- Page 104 Chapter 4 Settings — [NETWORK] menu [User] account [Account] [New][Password] Displays the account to change. Enter the desired new password. (Up to 16 characters in single byte) [New][User name] Enter the desired new user name. (Up to 16 characters in single [New][Password(Retype)] byte) Enter the desired new password again.
- Page 105 Chapter 4 Settings — [NETWORK] menu [CRESTRON RoomView] page The projector can be monitored and/or controlled with RoomView. To start the RoomView control page from the web control screen, you need to access with the administrator rights. (For user rights, the [CRESTRON RoomView] button is not displayed on the web control screen.) The control page of RoomView is displayed by clicking [CRESTRON RoomView].
- Page 106 Chapter 4 Settings — [NETWORK] menu [Info] page Click [Info] on the control page. [Projector Name] [Source] Displays the projector name. Displays the selected image input. [Mac Address] [Lamp Mode] Displays the MAC address. Displays the light source mode. [Lamp Hours] [Error Status] Displays the cumulative operating time (converted value) of the Displays the error status.
-
Page 107: [Digital Link] Menu
Chapter 4 Settings — [DIGITAL LINK] menu [DIGITAL LINK] menu On the menu screen, select [DIGITAL LINK] from the main menu. Refer to “Navigating through the menu” ( x page 41) for the operation of the menu screen. Switch the input to DIGITAL LINK. Note f When the optional digital interface box (Model No.: ET-YFB100G) is connected to the <DIGITAL LINK/LAN>... -
Page 108: Chapter 5 Maintenance
Maintenance Chapter 5 This chapter describes inspection when there are problems, and maintenance methods. 108 - ENGLISH... -
Page 109: Light Source/Temperature Indicator
Chapter 5 Maintenance — Light source/temperature indicator Light source/temperature indicator Managing the indicated problems If a problem should occur inside the projector, the light source indicator <LIGHT>/temperature indicator <TEMP> will inform you by lighting or flashing. Check the status of the indicators and manage the indicated problems as follows. Attention f When switching off the projector to deal with problems, make sure to follow the procedure in “Switching off the projector”... - Page 110 Chapter 5 Maintenance — Light source/temperature indicator Temperature indicator <TEMP> Flashing in red Flashing in red Flashing in red Indicator status Lighting in red (1 time) (2 time) (3 time) Internal temperature Internal temperature Internal temperature is Status Warm-up status is high (during is high (standby The fan has stopped.
-
Page 111: Maintenance
Chapter 5 Maintenance — Maintenance Maintenance Before maintaining the projector f Make sure to turn off the power before maintaining the projector. ( x pages 32, 34) f When switching off the projector, make sure to follow the procedures in “Switching off the projector” ( x page 34). Maintenance Outer case Wipe off dirt and dust with a soft, dry cloth. -
Page 112: Troubleshooting
Chapter 5 Maintenance — Troubleshooting Troubleshooting Review the following points. For details, refer to the corresponding pages. Problems Points to be checked Page f Is the power plug firmly inserted into the outlet? ― f Is the <MAIN POWER> switch turned <OFF>? f Is the wall outlet supplying electricity? ―... - Page 113 Chapter 5 Maintenance — Troubleshooting Attention f If problems persist even after checking the preceding points, consult your dealer. ENGLISH - 113...
-
Page 114: Chapter 6 Appendix
Appendix Chapter 6 This chapter describes specifications and after-sales service for the projector. 114 - ENGLISH... -
Page 115: Technical Information
11 21 31 32 33 When [DVI-I IN] is set to [DIGITAL] NAME? Projector name query xxxxx Returns the name set in [PROJECTOR NAME] of [NETWORK SETUP]. Manufacturer name INF1? Panasonic Returns manufacturer name. query RZ370 INF2? Model name query Returns model name. RW330... -
Page 116: Control Commands Via Lan
“xxxxxx:yyyyy:zzzzzzzz” xxxxxx Administrator rights user name for Web control (default user name is “admin1”) yyyyy Password of above administrator rights user (default password is “panasonic”) zzzzzzzz 8-byte random number obtained in Step 2) Command transmission method Transmit using the following command formats. -
Page 117: Error Response
Chapter 6 Appendix — Technical information r Error response Termination Character string Details symbol “ERR1” Undefined control command “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period (CR) Message 0x0d “ERR4” Timeout or no-acceptable period “ERR5” Wrong data length “ERRA”... -
Page 118: Serial In> Terminal
Chapter 6 Appendix — Technical information r Error response Termination Character string Details symbol “ERR1” Undefined control command “ERR2” Out of parameter range “ERR3” Busy state or no-acceptable period (CR) Message 0x0d “ERR4” Timeout or no-acceptable period “ERR5” Wrong data length “ERRA”... -
Page 119: Basic Format
Chapter 6 Appendix — Technical information Communication conditions (Factory default) Signal level RS-232C-compliant Sync. method Asynchronous Baud rate 9 600 bps Parity None Character length 8 bits Stop bit 1 bit X parameter None S parameter None Basic format Transmission from the computer starts with STX, then the ID, command, parameter, and ETX are sent in this order. Add parameters according to the details of control. -
Page 120: Menu Lock Password
Chapter 6 Appendix — Technical information Cable specification Control command The following table lists the commands that can be used to control the projector using a computer. r Projector control command Parameter/response Command Details Remark (parameter) character string Power on ―... -
Page 121: List Of Compatible Signals
Chapter 6 Appendix — Technical information List of compatible signals The following table specifies the types of signals compatible with the projector. f Signals that show formats are as follows. g V: Video g R: RGB g Y: YC g D: DVI-I g H: HDMI Scanning frequency Plug and play... - Page 122 Note f The number of display dots for PT-RZ370U is 1 920 x 1 080, and that for PT-RW330U is 1 280 x 800. A signal with a different resolution is converted to the number of display dots and displayed.
-
Page 123: Specifications
10 000:1 For video signals Horizontal: 15.75 kHz/15.63 kHz, Vertical: 50 Hz/60 Hz Horizontal: 15 kHz to 100 kHz, Vertical: 24 Hz to 120 Hz PIAS (Panasonic Intelligent Auto Scanning) system For RGB signals Dot clock frequency 162 MHz or less... - Page 124 Chapter 6 Appendix — Specifications Model No. PT-RZ370U PT-RW330U Color system 7 standards (NTSC/NTSC4.43/PAL/PAL-N/PAL-M/SECAM/PAL60) Projection screen size 1.02 m (40") - 7.62 m (300") Screen aspect ratio 16:9 16:10 Projection method [FRONT/CEILING], [FRONT/FLOOR], [REAR/CEILING], [REAR/FLOOR] 1 set, high-density D-Sub 15 p (female) RGB signals 0.7 V [p-p] 75 Ω...
-
Page 125: Dimensions
Chapter 6 Appendix — Dimensions Dimensions Units: mm 455 (17-29/32") * Actual dimensions may differ depending on the product. ENGLISH - 125... -
Page 126: Ceiling Mount Bracket Safeguards
Request for a qualified technician to do the installation. f Takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired. -
Page 127: Index
Index Index sRGB-compliant video …………………………… 50 [STARTUP INPUT SELECT] …………………… 74 Accessories ……………………………………… 17 <ID ALL> button [STARTUP LOGO] ……………………………… 66 <AC IN> terminal ………………………………… 20 Remote control …………………………… 19, 22 [STATUS] ………………………………………… 79 Adjusting adjustable feet ………………………… 26 <ID SET> button [SUB MEMORY LIST] ……………………………... - Page 128 If you wish to discard this product, please contact your local authorities or dealer and ask for the correct method of disposal. Web Site : http://panasonic.net/avc/projector/ © Panasonic Corporation 2012 Panasonic System Communications Company of North America One Panasonic Way 2F-13, Secaucus, NJ 07094 TEL: (877) 803 - 8492 Panasonic Canada Inc.
Need help?
Do you have a question about the PT-RW330U and is the answer not in the manual?
Questions and answers