Setting The Flash - Epson PhotoPC 2100Z User Manual

Note:
For more information on specifying the number of prints, see
"Making Print Settings" on page 58.
After you are finished taking pictures, you can view the
pictures you took, delete them, and make print settings.
See Chapter 3, "Viewing and Managing Your Photos".

Setting the flash

You can choose between three flash settings: Flash Auto, Flash
Off, and Red-eye Reduction. To change the setting, follow the
steps below.
1. Turn on the camera by sliding the OPEN switch to open
the lens cover.
Note:
For more information on turning on the camera, see "Turning
the camera on and off" on page 27.
- 33 -
2