Download Print this page

Craftsman 33668 Operator's Manual

Homeowner's series

Advertisement

Available languages

Available languages

Quick Links

OPERATOR'S
MANUAL
RRrrSMRN
HOMEOWNER'S
SERIES -INTERMEDIATE
MODEL # 33668
CALL 1=800=833=4405 FOR SERVICE PARTS. Refer to Service
Parts Drawing for full listing of Service Parts.
LOCATING MODEL # iNFORMATiON
Model numbers and other information required for service parts is
located on a label on the interior right side of the top most drawer.
• The maximum weight for each drawer should be no more than
25 pounds.
• Empty weight of the unit is 33 Ibs.
• The maximum product weight, including contents, should be no
more than 125 pounds.
• For casters, use high quality bearing grease, (yearly).
• Lubricate the slides with grease or equivalent,(twice
yearly.)
• Lubricate lock with graphite, (yearly).
Ball bearing slides
Friction slides
/L_
• Periodically the drawer fronts, drawer trim, and other surfaces
should be cleaned with a mild detergent and water.
• Auto wax will preserve the unit's luster finish. Apply the wax as to
a car. The wax will also help protect the unit against scratches.
• Grease and oil can be removed with most standard cleaning
fluids. For safety, use a nonflammable cleaning fluid.
• If drawer liners are supplied, it is recommended
they are used
to protect the finish inside the drawers and to make the drawers
easier to clean. The drawer liners may be cleaned with soap and
water.
DANGER
_L. is used to indicate a hazardous situation which, if
not avoided, will result in serious injury or death.
WARNING
Z_ indicates a hazardous situation which, if not
avoided, could result in serious injury or death.
CAUTIONis used to indicate a hazardous situation which, if not
avoided, may result in minor injury, moderate injury, or property
damage.
CAUTION:
Read and follow all Safety Rules and Operating
instructions before first use of this product.
A
stand on this product. You may fall or cause product
DANGER
• DO NOT
to tip.
• DO NOT
unstable
• DO NOT
to tip.
open more than one drawer. The product may become
and tip.
step in the drawers. You may fall or cause product
• DO NOT mount this product on a truck bed or any other
moving object.
• DO NOT move the product prior to closing and locking all the
drawers. The drawers could come open and make the product
unstable and tip.
WARNING
Z_
• WEAR SAFETY GLASSES when removing or repositioning the
slides.
• DO NOT pull this product when moving it. Push the product to
prevent personal injury.
• USE THE BRAKES when not moving this product. This will
prevent the product from roiling.
• DO NOT alter this product in any manner. For example, do not
weld external Iockbars or attach electrical equipment.
• Keep the product on level surfaces. The product may become
unstable and tip if stored or moved on an uneven surface.
• BE CAREFUL when closing the cover. Remove hands before
the cover closes completely.
CAUTION
• This product is not designed to be directly lifted with a fork lift, or
to be towed with any mechanical devices.
• The maximum weight for each drawer should never
be exceeded.
• Only transport this product empty. Properly secure
when transporting.
• DO NOT exceed maximum product weight, including contents.
See Operations Sections: Capacities for more information.
Distributed
by Sears Brands Management Corporation,
Hoffman Estates, JL60179
F1840

Advertisement

loading

Summary of Contents for Craftsman 33668

  • Page 1 OPERATOR'S MANUAL RRrrSMRN Friction slides Ball bearing slides HOMEOWNER'S SERIES -INTERMEDIATE • Periodically the drawer fronts, drawer trim, and other surfaces should be cleaned with a mild detergent and water. MODEL # 33668 • Auto wax will preserve the unit's luster finish. Apply the wax as to a car.
  • Page 2 Tools Required: NOTE: Not all operation instructions will relate to your model. 3/8 inch wrench 5/16-inch drill bit TO LOCK iNTERMEDiATE CHEST The Iockbar for the intermediate chest is stored in the top drawer. HARDWARE INCLUDED: Process: - Insert the Iockbar into the slot in the base. - Move the Iockbar toward the unit until the bent end fits 1/4 - 20 x 5/8-in (Qty: 4) into the slot near the lock.
  • Page 3 iNSTALLING DRAWERS Tab Style - Depress the release tabs on both sides, (this allows the slides to ride over the stops.) Pull out to Ball bearing slide - Pull slides and slide carrier out to fully remove. extended position (see illustration.) Hold the slide on the cabinet while aligning it with the slide on drawer.
  • Page 5 MANUEL D'UTILISATION ® Glissieres a roulement a billes Glissieres a friction • A intervalles periodiques, nettoyez les devants et garnitures des SERIE HOMEOWNER- INTERMEDIAIRE tiroirs et les autres surfaces avec de I'eau et un detergent doux • De la cite pour automobile conservera le fini lustre du coffre. NO DE MOD#LE 33668 Appliquez la cire comme sur une automobile.
  • Page 6 Outils necessaires REMARQUE : Toutes les instructions d'utilisation ne s'appliqueront pas a votre module. Cle de 3/8 po (9,5 mm) Meche de 5/16 po (7,9 mm) VERROUILLAGE DU COFFRE INTERM#:DIAIRE La barre de verrouillage pour le coffre interm_diaire se trouve darts le tiroir superieur. QUINCAILLERIE COMPRISE Methode :...
  • Page 7 Avec taquets iNSTALLATION DES TIROiRS - Enfoncez les taquets de degagement chaque cete (cela permet aux glissieres de coulisser Glissiere a roulement a billes - Tirez les glissieres par-dessus les butoirs). Tirez sur le tiroir pour I'enlever. et le porte-glissiere jusqu'& leur sortie complete (voir illustration).