Advertisement
SWITCH
See Figure2.
To turn yourddll ON, depressthe switchtdgger.To
tum it OFF, release the switchtdgger.
SELECTOR
BATTERY
CENTERPOSITION
(LOCK)
SWITCH
TRIGGER
Fig. 2
VARIABLE
SPEED
This tool has a vadable speed switch that delivers
higher speed and torque with increased tdgger
pressure. Speed is controlled by the amount of switch
trigger depression.
Note: You might hear a whistling or ringing noise from
the switch during use. Do not be concerned, this is a
normal part of the switch function.
TO INSTALL
BA'I-rERY
PACK
•
Lock switch trigger on your ddll by placing the
direction of rotation selector in center position.
See Figure 2.
•
Place battery pack in your ddll. Align raised db
inside drill with groove on battery pack. See
Figure 3.
LATCHES
DEPRESS LATCHES
TO RELEASE
BATrERYPACK
Fig. 3
•
Make sure the latches on each side of your
battery pack snap in place and battery pack is
secured in drill before beginning operation.
_
CAUTION:
When placing battery pack in your
drill, be sure raised db inside ddll aligns with
groove on battery pack and latches snap in place
properly. Improper assembly of battery pack can
cause damage to internal components.
TO REMOVE
BATTERY
PACK
•
Lock switch trigger on your drill by placing the
direction of rotation selector in center position.
See Figure 2.
•
Locate latches on end of battery pack and
depress to release battery pack from your drill.
See Figure 3.
•
Remove battery pack from your ddll.
8
Advertisement
