Hardware Installation; Driver Installation - Freecom HARD DRIVE XS 3.0 User Manual

External hard drive / 3.5" / usb 3.0

Hide thumbs Also See for HARD DRIVE XS 3.0:

Chapter 1: Hardware Installation

Safely remove the Freecom Hard Drive XS 3.0 via your operating system

(the "unplug or eject hardware" option in the Windows taskbar) before

disconnecting the USB cable or power cable and before switching off the

device. Failing to do so may result in data loss.

Chapter : Driver Installation

Under Windows XP / Vista and Windows 7 a separate Freecom driver is not required.

The drivers will be installed automatically by the operating system after plugging in

the Freecom Hard Drive XS 3.0 into the USB port of the computer.

1. Connect the interface cable to the Freecom Hard Drive XS

3.0.

2. Connect the cable of the power supply to the Freecom Hard

Drive XS 3.0 and the power supply itself to the socket.

3. Connect the interface cable to the interface port of your

computer.

Hardware Installation

Table of Contents

Do you have a question about the HARD DRIVE XS 3.0 and is the answer not in the manual?