Table of Contents
Advertisement
Operator's
Manual
3/8 in. CORDLESS
DRILL-DRIVER
Variable Speed / Reversible
Model No.
315.115200
13.2 Volt
315.115210
15.6 Volt
Save this manual for
future reference
,_ WARNING:
To reduce the risk of injury, the
user must read and understand the operator's
manual before using this product.
Customer
Help Line: 1-800-932-3188
Sears, Roebuck
and Co., 3333 Beverly
Rd., Hoffman
Estates,
IL 60179 USA
Visit the Craftsman web page: www.sears.com/craftsman
983000-170
12-03
0Q°s
Advertisement
Table of Contents
Related Manuals for Craftsman 315.115210
Summary of Contents for Craftsman 315.115210
- Page 1 To reduce the risk of injury, the user must read and understand the operator's manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA 0Q°s Visit the Craftsman web page: www.sears.com/craftsman 983000-170 12-03...
- Page 2 Parts Ordering/Service ............................... FULL ONE YEAR WARRANTY ON CRAFTSMAN 3./8 in, CORDLESS DRILL-DRIVER (f th(s 3/8 in. CRI_FTSMI_N° too( fails to give comp(ete satisfaction within one year from the date of purchase, RETURN IT TO THE NEAREST SEARS STORE OR SEARS SERVICE CENTER IN THE UNITED STATES, and Sears w((I replace it, free of charge.
-
Page 3: Work Area
WARNING: READ AND UNDERSTAND ALL IN- • Remove adjusting keys or wrenches before turning STRUCTIONS. Failure to fo{Iow a(I {nstruct(ons {{sted the tool on. A wrench or a key that }s left attached to a rotating part of the too( may result in persona( injury. be(ow, may result {n electric shock, fire and/or seri- ous personal injury. -
Page 4: Rules For Safe Operation
SERVICE • When servicing a tool, use only identical replace= ment parts. Follow instructions in the Maintenance • Tool service must be performed only by qualified section of this manual. Use of unauthorized parts or repair personnel, Service or maintenance performed failure to follow Maintenance Instructions may create a by unqualified personnel may result in a risk of injury. - Page 5 WARNING: Never use a battery that has been • That wire size is large enough for AC ampere dropped or received a sharp blow. A damaged battery rating of charger as specified below: is subject to explosion. Properly dispose of a dropped Cord Length (Feet) 25' 100' battery immediately.
- Page 6 Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION Volts Voltage Amperes Current Hertz Frequency (cycles per second)
- Page 7 The followingsignalwords and meaningsare intendedto explainthe levelsof risk associatedwith this product, SYMBOL SIGNAL MEANING DANGER: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury. WARNING: Indicates a potentially hazardous situation, which, if not avoided, could result in Death or serious injury.
- Page 8 PRODUCT SPECIFICATIONS DRILL-DRIVER 315,115200 315.115210 Chuck 3/8 in. Keyless 3/8 in. Keyiess Motor 13.2 Volts 15.6 Volts Gear Train One Speed One Speed Switch Variable Speed VariabJe Speed No Load Speed 0-600imin 0-600/rain Battery 130139018 130139015 Maximum Torque 100 in.lb. 110 in.lb.
- Page 9 BIT STORAGE SCREWDRIVER TORQUE BITS ADJUSTMENTRING KEYLESS CHUCK DIRECTION OF ROTATION SELECTOR (FORWARD / REVERSE) BATTERY SWITCH TRIGGER CHARGING STAND LIGHT WRIST STRAP BATTERY PACK CHARGER SHOWNIN TOOL Fig. 1 Instructions Packing List Your drill has been sh(pped comp(etely assembled. Dril( •...
-
Page 10: Charging Battery Pack
INFORMATION FOR RECHARGING HOT BAT- WARNING: Do not allow familiarity with this tool TERY PACK to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe When using this tool continuously, the batteries in your injury. - Page 11 SWITCH TO INSTALL BATTERY PACK See Figure 2, • Lock switch trigger on this drill by placing the direction To turn your drill ON, depress the switch trigger. To turn it of rotation se{ector in center position. See Figure 4. OFF, release the switch trigger.
- Page 12 SWITCHLOCK KEYLESS CHUCK See Figure 4, See Figure 5, The switch trigger can be locked in the OFF position. This Your drill has a keyless chuck. As the name implies, you feature can be used to prevent the possibility of accidental can hand tighten or release drill bits in the chuck jaws.
-
Page 13: Installing Bits
INSTALLING BITS REMOVING BITS See Figure 6, See Figure 0. • Lock the switch trigger by placing the direction of • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 4. rotation selector in center position. See Figure 4. •... - Page 14 BIT STORAGE DRILLING See Figure 9, See Figure 10, When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in Figure 9. SCREWDRIVER BITS BIT STORAGE AREA Fig.
- Page 15 CHUCK REMOVAL • Insert hex key in chuck and tighten chuck jaws se- curely. Tap sharply with a mallet in a counterclockwise See Figures 11, 12, and 13. direction. This will loosen chuck on the spindle. It can The chuck must be removed in order to use some acces- now be unscrewed by hand.
- Page 16 WARNING: When servicing, use only identical tool as well as workpiece. Craftsman replacement parts, Use of any other part may create a hazard or cause product damage. Only the parts shown on parts list, page 18 and 19, are intended to be repaired or replaced by the customer. All Avoid using solvents when cleaning plastic parts.
-
Page 18: Parts List
CRAFTSMAN 3/8in 13;2VOLT CORDLESS DRiLLeD RIVER_ M O DEL NO_3i5iii5200 number {n all correspondence regard{ng your 3/8 in., 13.2 VOLT CORDLESS DRILL-DRIVER or when The model number w{{I be found on a plate attached to the motor housing. A{ways mention the model | ordering repair parts. - Page 19 C RAFTSMAN 3/8in 15:6VOLT C OR D LESS D R iLL_ D RIVER_ M O DEL NO_3 i5iii52i number {n all correspondence regard{ng your 3/8 in., 15.6 VOLT CORDLESS DRILL-DRIVER or when The model number w{{I be found on a plate attached to the motor housing. A{ways mention the model | ordering repair parts.