Blowing Feature - Craftsman 113.179100 Owner's Manual

Operation (continued)
Blowing Feature
Your Vac features a blowing port. It can
blow sawdust and other debris. Follow the
steps below to use your Vac as a blower.
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada CSA Z94.3) when using
as a blower.
WARNING: To reduce the risk of
injury to bystanders, keep them clear
of blowing debris.
,_ CAUTION: Wear a dust mask if
blowing creates dust which might be
inhaled.
A CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
1. Locate blowing port of your Vac.
2. Insert the locking end of the
Pos-I-Lock® premium hose into the
blowing port of the Vac. The hose
should snap into place. To remove the
hose from the Vac, press the release
button in the hose assembly and pull
the hose out of the Vac inlet.
3. (Optional) Attach extension wand to
opposite end of hose.
4. Turn Vac on and you are ready to use
your Vac as a blower.
Blowing
Port
Pos-I-Lock®
Premium
Hose
14