Craftsman 706.146440 Operator's Manual page 3

STEP (1):
BB(6)
• While unpacking unit, if you wish, you can leave the
workbench top inside the original packaging to prevent the top
from being scratched, and complete the assembly steps.
• Determine the front and back of the top before starting.The
back of the top (A) has the 6 holes closest to the edge.
• Assemble (1) leg section (D or E) in each side of the top (A)
using (3) screws (BB) in each. The back side of the legs have
holes in them, the fronts do not have any holes.
/
STEP (2):
AA (8)
BB(12)
• Attach the front and back rails (B) to the legs using (8) bolts
(AA).
• Finger tighten.
• Attach to the workbench top using (12) screws (BB).
\
STEP (3):
AA(12)
• Attach a angle brace (G) to each side of the legs using (3)
bolts (AA)on each.
• Finger tighten.
AA
STEP (4):
AA(4)
• Attach the last rail to the back of the legs using (4) bolts (AA).
• Finger tighten.
• Square the unit and wrench tighten all fasteners.