Table of Contents
Advertisement
Modem
<Only for model with modem>
Connecting the Internal Modem with a Telephone Jack
CAUTION
You cannot connect the modem to the following lines.
• Interphone
• Intercoms
• ISDN
Be sure to connect the telephone cable into the modem port, not into the LAN port.
Use a surge protector since the modem may be damaged by a sudden high voltage surge that may occur in the event
of a lightning strike.
1
Open the cover and connect the telephone jack (A) to the com-
puter by using the telephone cable (included) (B).
Hold the cable so that the shape of the connector (C) matches the port, and
insert fully until it clicks.
2
Click
(Start) - [Control Panel] - [Connect to the Internet] -
[Dial-up] and change the settings as necessary.
Click [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] and change the settings as neces-
sary.
NOTE
*1
Do not enter sleep
To remove the cable, press and hold the lever and pull out.
*1
Windows XP: standby
or hibernation during communications.
85
Advertisement
Table of Contents
