2.6
Cable connections
•
•
3
Pre-connected system cables
1.
24-pin SSI power connector (from power supply to motherboard)
2.
8-pin SSI power connector (from power supply to motherboard)
3.
SMBus connector
4.
System fan connectors (from motherboard FRNT_FAN1, CPU_FAN1
FRNT_FAN2, FRNT_FAN3, CPU_FAN2, and FRNT_FAN4 to system fans)
5.
USB connector (from motherboard to front I/O board)
6.
Panel connector (from motherboard to front I/O board)
7.
SATA connectors (from motherboard to SATAII/SAS backplane board)
8.
SAS connectors (from motherboard to SATAII/SAS backplane board)
9.
Auxiliary panel connector (from motherboard to front I/O board)
2-14
The bundled system cables are pre-connected before shipment. You do
not need to disconnect these cables unless you will remove pre-installed
components to install additional devices.
Refer to Chapter 4 for detailed information on the connectors.
1
2
9
5
6
7
2
8
4
4
4
4
Chapter 2: Hardware setup
4
4