Advertisement
, Repeat the procedure on the otherslide
and removethe drawer.
, To reinstai! the drawer, PPt_
stop far
enough outto engage the lance and
push the d_wer onto the slidesunlathe
•stopspassover the lances.
REMOVING AND INSTALLING
SLIDES:
Ball bearing only:
NOTE: For smooth operation, make
sure that the drawers are matched with
their origina| slides,
- Removethe dr-_ver(mt'eT1o drawer
removalinstructions)..
o Ll_and ho!_thespltn=qretzinerwith a
• screwdriverand push the slidetoward the
rear of the unit The slidemay now be
removed.
_;pf_j
I_elainer
• To reinstall t he _de, _ace the slide in the
appropriatepositionin the unit. l:_fl
• towardthe f'fontof'the unitun_ the spr_tg.
rebiner snaps into positionand secures
_e s_de.
DETENT iNSTALLATION:
Ball bearing only,"
• Each draweris equipped wi(ha detent to
help preve_ spontal_eousdrawer
opening.
" _"_I_Y _nap the detent frowardfromthe
backside of the drawer and sr, a p new
dete_tin place.
- For eastern, use high _essure gun
grease, or equivalent, I[yeady}.
• LubricatesEdes(twiceyeady).
• Lubricate lockwith graphite. (yearly).
• Pedodicagythe drawerfron_, drawer
trim, and other surfacesshould be
cleaned with e m_d detergent and water
to keepthem Ioolangnew.
- Autowax wi_presen_ethe storage unit'_
"lusterfinish. Applythe wax as to a car.
The wax w'll help protectthe un'_against
scratches.
• Grease and on can be removedwith most
" sta_l_rd cle_ningfl_dso For s_ety, use a
non-flammable cleaningfluid.
• If drawerliners are supplied, it L_
recommended theyare used to p_otect
the f'mish inside the drawers and to make
the drawers easier to clean. DFawe_" l iners
may be deaned with soap andwabsr.
Advertisement
