Canon EOS-1DS MARK III Instruction Manual page 22

Changing image Ptaybaek Settings
Setting the LCD MonitQr Brightness
You can adjust the brightness of the LCD monitor to make ateasier to
read.
Semeet [LCD brightness].
® Under the [t?:] tab, select [LCD
brightness], then press < _ >
Adjust the brightness.
® Whale referring to the gray chart, turn
the <O> dial, then press <_>.
To Check the image:s exp0sure, you SHould i00k at the histogram (p.118).
Setting the image Review Time
How long the image is displayed on the LCD monitor immediately after
capture can be set. To keep the image displayed, set [HoJd]. To not
have the image displayed, set [Off].
Semeet [Review time].
® Under the [_:] tab, select [Review
time], then press <_>.
Set the desired review time.
® Turn the <0> dial to select the time,
then press <_>.
Uf [He!d] iS Set, the image will be diSplayed Until the auto power off time
e!apses.
129