Table of Contents
Advertisement
Cable box
? Use by attaching to the Cable box holder
AC adaptor
Camera stand
1 Camera handpiece connection terminal
2 DC IN terminal
3 USB terminal
4 VIDEO OUT terminal
5 Terminal cover
Slide the cover to the left to access the USB terminal or
slide the cover to the right to access the VIDEO OUT
terminal.
It is possible to fasten the Cable box in place. Fasten in a flat
location using 2 commercially-available screws.
(Screws are not supplied)
* Recommended screw size is M3 size.
* Depth of the screw holes of the Cable box holder is 2 mm
(0.08"). (2 places)
Use this as a reference to select the length of the
fastening screw.
* Fasten the Cable box holder where there is enough
strength.
1 AC adaptor
2 DC cord
3 DC plug
4 AC cord
Place the product in the stand when it is not being used.
Fasten the Camera stand to a wall, etc., using 2 commercially
available screws in the direction as shown in the figure at left.
(Screws are not supplied)
* Recommended screw size is M3 size.
* Depth of the screw holes for the Camera stand is 9 mm
(0.35") for the top hole and 9.5 mm (0.37") for the bottom
hole.
Use this as a reference to select the length of the fastening
screw.
* Fasten the Camera stand where there is enough strength.
Hide quick links:
Advertisement
Table of Contents
