Connecting The Printer To A Wireless Network Using The Printer Software; Connecting The Printer To A Wireless Network Using The Embedded Web Server - Konica Minolta bizhub 3300P User Manual

Connecting the printer to a wireless network using the printer software

Using the Wireless Setup Utility (Windows only)
The Wireless Setup Utility lets you:
• Configure the printer to join an existing wireless network.
• Add a printer to an existing ad hoc network.
• Change the wireless settings after installation.
• Install the printer on additional network computers.
Please refer to Software CD for installation and access of the Wireless Setup Utility.
*
Included with printer models shipped in spring 2013 and thereafter.
Using the Wireless Setup Assistant (Macintosh only)
The Wireless Setup Assistant lets you:
• Configure the printer to join an existing wireless network.
• Add a printer to an existing ad hoc network.
• Change the wireless settings after installation.
• Install the printer on additional network computers.
Please refer to Software CD for installation and access of the Wireless Setup Assistant.
*
Included with printer models shipped in spring 2013 and thereafter.

Connecting the printer to a wireless network using the Embedded Web Server

Notes:
• Make sure your printer is connected temporarily to an Ethernet network.
• Make sure a wireless network adapter is installed in the printer and is working properly. For more
information, see the instruction sheet that came with your wireless network adapter.
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Network/Ports >Wireless.
User's Guide
*
*
- 34 -