Page 1
Samsung TV F/W Upgrade Guide Model : P450 Series PN42A450P1D PN50A450P1D Samsung Electronics...
Page 2
Step1. How to prepare the USB Memory Drive 1. Save the firmware file into your computer. File Name : T-CRLAUSC.exe 2. Connect the USB Memory Drive to the USB port of your PC. Copy the file into the USB Memory Drive. 3.
Page 3
4. The TV scans the USB Memory Drive. ※ Important If the firmware version you downloaded from the Samsung website or received from Samsung is older than or has smaller version number than the version on your TV, do not install it.
Page 4
※ Important If the firmware version you downloaded from the Samsung website or received from Samsung is older than or has smaller version number than the version on your TV, do not install it.
Step3. How to check the Firmware Version 1. Press the Menu button on your remote control 2. Go to Setup. On the Setup Menu, select SW Upgrade. TV F/W Version : XXXX 3. Press the Info button on your remote. The firmware version appears at the bottom of your screen.
Page 6
Firmware Upgrade Error Messages 1. If the USB Memory Drive was not inserted into WISELINK port. 2. If there are no files on USB Memory Drive. 3. If the firmware version on the USB Memory Drive is same as your TV’s firmware version...
Page 7
Cautions While upgrading is in progress : Do not pull the USB Memory Drive out. Do not unplug the power cable. Do not turn the TV off. ※ Warning Pulling the USB Memory Drive out or unplugging the power cable will cause a firmware error or main board failure.