Cisco AS5400XM - Universal Gateway Voice High-Density Easy Order Bundle Installation Manual page 50

Online Insertion and Removal of the CT3 Feature Card
To install the CT3 feature card, follow these steps:
Step 1 Attach an ESD-preventive wrist strap.
Step 2 Slide the feature card into the slot until the connector pins make contact with the carrier card backplane
connector. (See
Figure 4-9
Figure 4-10
Align the captive screws with their holes, and seat the card completely.
Step 3
Tighten the screws to secure the feature card to the chassis. (See
Step 4
Figure 4-11
Cisco AS5350XM and Cisco AS5400XM Universal Gateways Card Installation Guide
4-6
Figure 4-9 and Figure
Installing the CT3 Feature Card in the Cisco AS5350XM Universal Gateway
Installing the CT3 Feature Card in the Cisco AS5400XM Universal Gateway
Tightening the Captive Screws on the Cisco AS5350XM Universal Gateway
Captive
DFC
Captive
screw
screw
4-10.)
Carrier
card
Chapter 4 Channelized T3 Feature Card
Figure 4-11 and Figure 4-12.)
Chassis
78-17406-01