Driver Installation And Setup - ASROCK 970 Extreme4 User Manual

Step3. Align and insert ASRock SLI_Bridge_2S Card to the gold f ngers on each
graphics card. Make sure ASRock SLI_Bridge_2S Card is f rmly in place.
ASRock SLI_Bridge_2S Card
Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE2 slot.

2.5.2 Driver Installation and Setup

Install the graphics card drivers to your system. After that, you can enable the Multi-
Graphics Processing Unit (GPU) feature in the NVIDIA
Please follow the procedures below to enable the multi-GPU feature.
®
For Windows XP / XP 64-bit OS:
A. Double-click NVIDIA Settings icon on your Windows
B. From the pop-up menu, select Set SLI and PhysX confi guration. In
Set PhysX GPU acceleration item, please select Enabled. In Select
an SLI confi guration item, please select Enable SLI. And click Apply.
C. Reboot your system.
D. You can freely enjoy the benef t of SLI
®
nView system tray utility.
taskbar.
®
TM
feature.
21