Clear The Pairings; Play Music - Nokia MD-100W User Manual

8
1 Switch on your speaker and phone or other compatible device.
2 If you've previously paired your speaker with another device, press and hold for
2 seconds to switch Bluetooth on.
3 Within 3 minutes, switch Bluetooth on in your phone, and search for Bluetooth
devices. For details, see your phone user guide.
4 On your phone, select the speaker from the list of found devices.
5 If asked, type in the passcode 0000.

Clear the pairings

You can clear the paired devices list on your speaker.
Switch the speaker off, then press and hold
The white and red indicator lights alternate.
Pressing and holding
After you've cleared the pairings, you must pair the speaker before you can use it
again. When you switch the speaker on, it goes into pairing mode automatically.
If the paired devices list on your speaker is cleared, also clear that pairing in your
device before pairing again.

Play music

While playing music on your phone, you can control the music with your speaker as
well.
and power also restores factory settings in your speaker.
and the power key for 5 seconds.