Table of Contents
Advertisement
Operating Instructions
Cooking Zone Selection
To select the required cooking zone touch the corresponding sensor
field for approximately 1 second.
The zero with a decimal point = lights up in the associated display
field of the cooking zone. The decimal point indicates that settings can
only be made in this cooking zone. When you touch the cooking zone
sensor field again, the decimal point goes out and further settings are
not possible.
To switch off the sensor fields, press + and - simultaneously.
Heat Level Selection
For setting and adjusting the heat level (! to )) on the selected coo-
king zone.
Increase the heat level with the sensor field +.
0
Reduce the heat level with the sensor field -.
If several cooking zones are simultaneously in operation, in order to
3
adjust the heat level it is necessary to select the corresponding cooking
zone by touching the appropriate sensor field. A decimal point in the
display shows the selected cooking zone.
84
and
+
-
Advertisement
Table of Contents
