Eclipse CD3200 Owner's Manual

Cd/usb multi-source receiver with bluetooth

Hide thumbs Also See for CD3200:

Handy reference manual (177 pages)

Manual de usuario (115 pages)

Manual del usuario (5 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

Table of Contents

Quick Links

Need help?

Do you have a question about the CD3200 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eclipse CD3200

Page 1 Owner's Manual / Manuel de I'utilisateur / Manual del propietario CD/USB Multi-Source Receiver with Bluetooth wireless technology We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
Page 2: For Your Safety In Using The Cd3200
For your safety in using the CD3200 For your safety in using the CD3200 For your safety in using the CD3200 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD3200. They show safe and correct ways to handle the product so as to prevent personal injury to you, others and to avoid property damage.
Page 3 For your safety in using the CD3200 WARNING ● Air bags are vital safety equipment. Never install the main unit in a way which will alter air bag wiring or interfere with air bag deployment. Air bags must function properly in the event of an accident.
Page 4 For your safety in using the CD3200 CAUTION ● Wiring and installing this main unit requires expertise and experience. Professional installation is recommended. Consult with your dealer or a professional installer. Incorrect wiring may damage the main unit or interfere with safe vehicle operation. ●...
Page 5 For your safety in using the CD3200 CAUTION ● When inserting batteries into the remote control, be careful with the polarity (positive/ negative), and insert them as indicated. If the battery polarities are incorrect, injuries and pollution to the surroundings may result from battery ruptures and leakage. ●...
Page 6 For your safety in using the CD3200...
Page 7: Table Of Contents
Table of Contents For your safety in using the CD3200......... 2 Operating precautions.............. 14 Names of controls and parts ........... 16 How to operate the CD/MP3/WMA player ....... 22 How to operate the USB music file player......32 The Bluetooth audio function ..........36 How to operate the tuner............
Page 8 Table of Contents For your safety in using the CD3200............ 2 Operating precautions................. 14 Notes on operation ....................... 14 Names of controls and parts............... 16 Turning the power on and off..................18 Switching Audio Modes ....................18 Adjusting volume ......................18 Switching Rotary Modes....................
Page 9 Table of Contents SCAN/REPEAT/RANDOM ................... 28 FOLDER SCAN/REPEAT/RANDOM................29 DISPLAYING TITLE ..................... 29 Ejecting the disc ......................30 How to operate the USB music file player ......... 32 About playable USB memory standards............... 32 Playable MP3 file standards................... 32 Playable WMA file standards ................. 32 Format of USB memory ..................
Page 10 Table of Contents The Bluetooth hands-free function ........... 48 About the Bluetooth hands-free function ..............48 About the Bluetooth specifications ................48 Supported Bluetooth specifications ................ 48 Supported profile....................48 What is Bluetooth? ....................... 49 Selecting the Bluetooth hands-free mode ..............49 Making a call.........................
Page 11 Table of Contents How to operate the Sound Adjustment Mode ........66 About Sound Adjustment Mode..................66 About parametric EQ....................67 About position selector................... 67 About crossover ..................... 68 Switching the sound adjustment mode................. 69 Parametric equalizer adjustment (PEQ) ............... 69 Setting preset EQ ....................
Page 12 Table of Contents How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only)............... 86 About HD Radio......................86 Switching between displays when receiving HD Radio ..........86 HD Radio reception settings..................86 How to operate the tuner with an optional XM satellite radio tuner connected (U.S.A./CANADA only) ............
Page 13 Table of Contents Others....................100 Connecting a portable audio player to the AUX jack ..........100 Switching the AUX mode on and off ..............100 Switching the input system................... 100 Changing auxiliary input sensitivity ..............101 If you have a question: ..............102 Displayed information (for troubleshooting) ..............
Page 14: Operating Precautions
Operating precautions Operating precautions Operating precautions <Your CD3200 will perform well over a long period of time through correct handling and care.> Notes on operation • For your safety, play only at volume levels that allow outside sounds to be heard. •...
Page 16: Names Of Controls And Parts
Names of controls and parts Names of controls and parts Names of controls and parts Front view Button Name/Working [ e (OPEN/EJECT)] button Opens/closes front panel and ejects CD. [VOL] button Adjusts volume. [SELECT] button Selects radio station and CD tracks. Selects setting items.
Page 17 Names of controls and parts Button Name/Working Button Name/Working [SOURCE/PWR] button [Release] button Switches audio mode. Detach the right end of the front panel from the Turn the power on or off. body of the main unit. [RTN/BAND] button [MUTE] button Returns to previous screen.
Page 18: Turning The Power On And Off
Names of controls and parts Turning the power on and off Switching Audio Modes When the power is turned on, the state used Press the [SOURCE] button for when the power was turned off such as CD and less than one second. tuner playback is restored.
Page 19: Switching Rotary Modes
Names of controls and parts Switching Rotary Modes About a shortcut The [VOL] button can be switched to other Create a shortcut for frequently-used functions functions. When the rotary mode is set to ON, so that they can be recalled with a single you can switch from the volume adjustment operation.
Page 20: Using A Shortcut
Names of controls and parts Using a shortcut Pattern Display Displays the Sound Meter Press the [ /MENU] button for Sound Meter set in display more than one second. adjustment mode The Menu Selection mode will be (refer to page 73). activated.
Page 21: Detaching The Front Panel
Names of controls and parts Detaching the front panel Using the detachable panel How to attach the detachable panel The front panel of the main unit can be Insert the left end of the front panel removed. into the main unit. By removing this panel when you leave the Engage the catch at the left end of the vehicle, you can prevent the theft of the main...
Page 22: How To Operate The Cd/Mp3/Wma Player
Operation How to operate the CD/MP3/WMA player About compact discs Operation • The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback.
Page 23: About Cd Accessories
How to operate the CD/MP3/WMA player About CD accessories • Do not use accessories (stabilizers, protective seals, laser lens cleaners, etc.) sold for “improving sound performance” or “protecting CDs.” The changes in CD thickness or outside dimensions made by these accessories may cause problems in the player. •...
Page 24: About Mp3/Wma
Operation About MP3/WMA ATTENTION The making of MP3/WMA files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited. What is MP3/WMA? MP3 (MPEG Audio Layer III) is a standard format for audio compression technology. By using MP3, a file can be compressed to one-tenth the size of the original.
Page 25: Id3/Wma Tag
How to operate the CD/MP3/WMA player ID3/WMA tag MP3/WMA files have an “ID3 / WMA Tag” that allows input of information so that data such as song title and artist can be saved. This main unit supports ID3v. 1.0, 1.1 and WMA tags. Media Media capable of playing MP3/WMA includes CD-R and CD-RW discs.
Page 26: File Names
Operation File names Only files with the MP3/WMA file extension “.mp3”, “.wma” can be recognized as MP3/WMA and played. Be sure to save MP3 files with the “.mp3” file extension. Be sure to WMA files with the “.wma” file extension. The “MP” letters of the file extension will be recognized whether entered as uppercase letters or lowercase letters.
Page 27: Listening To Cd
How to operate the CD/MP3/WMA player Listening to CD TRACK (FILE) UP/DOWN Press the [ e (OPEN/EJECT)] CD, MP3/WMA button. The front panel opens. Briefly press the [SELECT] (Right/ Left) button. If a disc has already been loaded, the disc will be ejected. (Right): Advances to the next track (file).
Page 28: Folder Up/Down
Operation FAST FORWARD/REWIND ATTENTION For details on how to operate the rotary mode CD, MP3/WMA function, refer to page 19. Press and hold the [SELECT] (Right/Left) button. FOLDER UP/DOWN (Right): Fast forwards. MP3/WMA (Left): Press the [SELECT] (Up/Down) Rewinds. button. (Up): SCAN/REPEAT/RANDOM Selects the next folder.
Page 29: Folder Scan/Repeat/Random
How to operate the CD/MP3/WMA player FOLDER SCAN/REPEAT/ MP3/WMA RANDOM Press the [4 SCAN] button, the [5 RPT] button or the [6 RAND] MP3/WMA button. Press the [4 SCAN] button, the [5 RPT] button or the [6 RAND] button The main unit will play the first 10 for more than 1 second.
Page 30: Ejecting The Disc
Operation Ejecting the disc MP3/WMA Press the [SCREEN/TEXT] button Press the [ e (OPEN/EJECT)] for more than one second. button. The front panel opens and the disc is ejected. Each time the button is pressed, ATTENTION the text will be displayed in the fol- lowing order.
Page 32: How To Operate The Usb Music File Player
Operation How to operate the USB music file player About playable USB memory standards Operation • Supported File System: FAT 12/16/32 • Playable Audio Format: MP3/WMA • Max.Current: 500mA • Compatibility: USB1.1/2.0 • Correspondence: USB mass storage class Playable MP3 file standards •...
Page 33: Format Of Usb Memory
How to operate the USB music file player • Supported channel modes: monaural, stereo Format of USB memory The USB memory format must be ISO9660 Level 1 or Level 2. Standards are as follows: • Maximum directory layers: 8 layers •...
Page 34: How To Operate The Usb Music File Player
Operation How to operate the USB music file player When a USB memory or a digital audio player with a USB terminal is connected to a USB connector, music files can be played from the USB memory. USB connection terminal for USB memory or digital audio player.
Page 35: Listening To Music Files In Usb Memory
How to operate the USB music file player Disconnecting USB memory Listening to music files in USB memory Disconnect the USB memory Connect the USB memory to the parallel to the USB connector. USB connector. ATTENTION Switch to the USB mode. Do not remove the USB memory while playing, reading or writing data.
Page 36: The Bluetooth Audio Function
Operation The Bluetooth audio function About the Bluetooth audio Operation ATTENTION function • If the portable device is used with other wireless devices, it may have a negative The use of Bluetooth wireless communication effect on the communication capabilities of technology enables Bluetooth-compatible...
Page 37: What Is Bluetooth
The Bluetooth audio function What is Bluetooth? Press the [SELECT] (Up) button. Bluetooth is a form of short-range wireless The connected Bluetooth-compatible communication technology, used to connect cell portable device starts to play music. phones and personal computers. This technology enables hands-free calling and ATTENTION data transmission between Bluetooth-compatible devices.
Page 38: Selecting The Music You Want To Listen To
Operation Selecting the music you want to • Device INFO display: Displays device information for the main unit. listen to Displaying the BT Audio Set Press the [SELECT] (Right/Left) selection mode button. Right: Press the [ /MENU] button for Advances to the next track. more than one second.
Page 39: Connecting The Main Unit And The Portable Device
The Bluetooth audio function Press the [RTN/BAND] button. When the connection has been completed, the "COMPLETED" message appears on the display. The portable device is set as a Bluetooth audio source. The portable device is now connected to the main unit. ATTENTION ( and appear on the display.)
Page 40: Displaying Device Information For The Main Unit
Operation Press the [ENTER] button. Press the [RTN/BAND] button. The BT Audio Set selection mode is ATTENTION activated again. If you do not want to cancel the connection, press the [RTN/BAND] button. The BT Audio Set selection mode is activated again. When the disconnection has been completed, the "COMPLETED"...
Page 42: How To Operate The Tuner
Operation How to operate the tuner Operation Press and hold the [SELECT] ATTENTION (Right/Left) button. The device • If stations have been stored in the memory, starts to search for stations pressing a button from [1] to [6] will enable automatically.
Page 43: Automatically Storing Stations Into Memory. (The Automatic Preset Mode: Asm)
How to operate the tuner Automatically storing stations Manually storing stations into into memory. (The automatic memory preset mode: ASM) Store a station to a preset button. Press the [SELECT] (Up) button for Press the [SELECT] (Right/Left) more than two seconds, until you button to tune to the station that hear a beep.
Page 44: Changing The Reception Sensitivity For Automatic Scanning
Operation Changing the reception Changing the radio band location sensitivity for automatic The location for the radio bands used between scanning the North American region and the Asia/ Australia/Latin region can be switched. The The main unit lets you select the reception default setting is USA (North America).
Page 46: How To Use The Remote Control
Operation How to use the remote control Precautions in use of the remote control Operation • Be careful when handling the control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction. •...
Page 47: Replacing The Battery
How to use the remote control Insert the two batteries as Button Name/Working indicated into the battery [ d PRESET CH u ] buttons compartment. [ dDISC u ] buttons Selects radio preset channels and performs disc mode functions. [MODE] button Switches audio source mode.
Page 48: The Bluetooth Hands-Free Function
Operation The Bluetooth hands-free function About the Bluetooth hands-free • Depending on the surrounding environment, Operation the connection may become unstable, and the function Bluetooth hands-free function may not be able to be operated from the main unit. In The use of Bluetooth wireless communication such cases, confirm that the connection technology enables a Bluetooth-compatible cell status is good be referring to the radio wave...
Page 49: What Is Bluetooth
The Bluetooth hands-free function What is Bluetooth? Making a call Bluetooth is a form of short-range wireless This function enables you to dial phone numbers communication technology used to connect cell from the main unit, or to make calls using the phones and personal computers.
Page 50: Making A Call Using Preset Dial
Operation Press the [MODE] button ATTENTION repeatedly until the "Incoming A maximum of 28 digits can be input per Calls" is displayed. (Incoming call phone number. history) message appears on the If you input an incorrect number, move the display. cursor to that number, and input the correct The incoming call history appears on number by following Step 3.
Page 51: Making A Call Using The Phonebook
The Bluetooth hands-free function Receiving a call Making a call using the phonebook Calls can be made using the phone numbers Calls can be received while in any source mode. stored in the phonebook of the main unit. There is also an automatic answering function to answer automatically.
Page 52: Adjusting The Voice Volume
Operation Adjusting the voice volume • Phone Book setting: To store data from the phonebook of the cell Adjust the voice volume while the call is in phone in the phonebook of the main unit. progress. • Auto Answer setting: To set the cell phone to Auto Answer.
Page 53: Registering A Cell Phone
The Bluetooth hands-free function Registering a cell phone • Be sure to perform the registration of the cell phone only while the "Waiting" message Cell phones can be registered in the main unit. is on the display. There are two methods that can be used to register a cell phone in the main unit.
Page 54: Delete A Registered Cell Phone
Operation Delete a registered cell phone Press the [SELECT] (Up/Down) button to select Device Search. Press the [SELECT] (Up/Down) Press the [ENTER] button. button while in the Phone Setting selection mode to select Select "Searching" will be displayed. Phone. Press the [ENTER] button. ATTENTION "FAILED"...
Page 55: Disconnecting A Cell Phone
The Bluetooth hands-free function Press the [SELECT] (Up/Down) Press the [SELECT] (Up/Down) button to select the cell phone to button to select Disconnect. be connected. Press the [ENTER] button. Press the [ENTER] button. The "Disconnect ?" message appears display confirm Press the [SELECT] (Up/Down) disconnection.
Page 56: Setting Auto Answer
Operation ATTENTION ATTENTION The default setting for Auto Answer is OFF (Auto Answer is disabled). Setting the ring tone The ring tone can be set on or off for incoming calls. Ring tone is set ON by default. Press the [SELECT] (Up/Down) •...
Page 57: Displaying Device Information For The Main Unit
The Bluetooth hands-free function Displaying device information for Deleting data from the phonebook the main unit Press the [SELECT] (Up/Down) The name of the device (ECLIPSE BT), the button while in the Phone Setting passcode (default setting - 1234), and the BD selection mode to select Delete.
Page 58: Changing The Passcode
Operation Deleting all data Press the [SELECT] (Up/Down) button to select Outgoing Calls or Press the [SELECT] (Up/Down) Incoming Calls. button while in the Phone Setting Outgoing Calls: selection mode to select Delete. Outgoing call history Press the [ENTER] button. Incoming Calls: Incoming call history Press the [SELECT] (Up/Down)
Page 59 The Bluetooth hands-free function Press the [SELECT] (Right/Left) button to move the cursor. Right: The cursor moves to the right. Left: The cursor moves to the left. Repeat Steps 3 and 4 to input the passcode to enter the next digit. Press the [ENTER] button when you have input the passcode.
Page 60: Esn Security Operating Procedure
Various Settings ESN security operating procedure About ESN Various Settings Press the [ e (OPEN/EJECT)] button. This main unit is equipped with ESN (ECLIPSE The front panel opens. Security Network). A music CD (Key CD) which has been registered in the main unit, is Insert the Key CD into the disc slot.
Page 61: How To Change The Key Cd
ESN security operating procedure When the power is turned on after ATTENTION the battery power has been If a CD has already been inserted, a "SEC" disconnected, the "SEC" message message appears, and then the front panel is displayed for two seconds. The opens and the CD is ejected.
Page 62: How To Turn The Security Indicator On/Off
Various Settings How to turn the security While pressing button [6], press indicator on/off the [SCREEN/TEXT] button, and hold both for five seconds. Once ESN security is activated, the indicator "SEC" will be displayed for two flashes whenever the vehicle's ignition switch is seconds.
Page 64: How To Operate The Audio Control
Various Settings How to operate the AUDIO CONTROL Switching audio control modes Various Settings Various audio control modes may be fine-tuned using this procedure. Press the [ENTER] button for less than one second to select the item to be adjusted. Modes will switch in the order shown below each time the button is pressed.
Page 65 How to operate the AUDIO CONTROL SVC Setting examples: The volume for the default FM mode (default value: 40) is used as a reference for storing the differences in volume that have been set for each audio mode. Audio mode BT-Audio Default value Reference...
Page 66: How To Operate The Sound Adjustment Mode
Various Settings How to operate the Sound Adjustment Mode About Sound Adjustment Mode Various Settings The system has several features that allow you to adjust the acoustic characteristics inside the cabin. Item Function Page 3-band setting, the frequency, and the Q curve pattern can be adjusted. (Parametric EQ) Position A preset speaker level for each seat, and the balance can be selected.
Page 67: About Parametric Eq
How to operate the Sound Adjustment Mode About parametric EQ A variety of materials are used inside a vehicle to manufacture the seats and windows, and because these materials absorb and reflect sound in different ways, the parametric equalizer lets you adjust the peaks and dips of the frequency characteristics inside the vehicle to compensate for this.
Page 68: About Crossover
Various Settings About crossover The frequency band that is stored by audio media such as CDs is a fairly wide range from 20 Hz to 20 kHz, and it is difficult for a single speaker to be able to play back all frequencies in such a wide range.
Page 69: Switching The Sound Adjustment Mode
How to operate the Sound Adjustment Mode Switching the sound adjustment Setting preset EQ mode Press a button from [2] to [6] while the PEQ setting mode is activated. Press the [ /MENU] button for Pressing the button allows you to more than one second.
Page 70: Position Selector
Various Settings Position selector Press the [SELECT] (Up/Down) button to adjust the Q curve The sound field can be adjusted for the listener's pattern. seat position. Each time the button is pressed, the Q Press the [SELECT] (Up/Down) curve pattern changes in the following button to select Position Sel.
Page 71: Non-Fader Phase (Non-F Phase)
How to operate the Sound Adjustment Mode Press the [ENTER] button to select LPF or HPF. Each time the button is pressed, the setting item changes in the following order. ↔ HPF *1: The cut-off frequency is 80Hz. *2: The cut-off frequency is 100Hz. Press the [SELECT] (Up/Down) button to select Slope ON or OFF.
Page 72: Making Changes With Display Adjustment Mode
Various Settings Making changes with Display Adjustment Mode Various Settings This mode lets you adjust the display brightness, change the display type, etc. Switching the Display Press the [SELECT] (Right/Left) Adjustment Mode button to adjust the brightness. Right: Increases the brightness level. Press the [ /MENU] button for more than one second.
Page 73: Changing Display Type (Disp Type)
Making changes with Display Adjustment Mode Changing display type Press the [ENTER] button. (DISP Type) The selected settings will take effect. The display type (Background or Sound meter) can be changed. Changing the sound meter (Sound Meter) Press the [SELECT] (Up/Down) button to select DISP Type.
Page 74: Importing Display Data (Disp Data)
Various Settings Importing display data (DISP Press the [SELECT] (Up/Down) Data) button to select the media type. Screens can be downloaded from the ECLIPSE Press the [ENTER] button. website (E-iSERV) and used instead of the pre- set motion pictures. Download the data by •...
Page 75: Changing The Scroll Type (Scroll Type)
Making changes with Display Adjustment Mode Changing the scroll type (Scroll CAUTION Type) On the CD-R or USB memory, if there is no file whose data type is the one you The scroll type of the text display can be selected, the "NO DATA"...
Page 76: Making Changes With Function Mode
Various Settings Making changes with Function Mode Various Settings *6: This setting can only be chosen A variety of settings can be changed. when an optional XM Satellite Switching the Function Mode radio tuner unit is connected. (Refer to page 90 for details on XM Satellite radio operation.) Press the [ /MENU] button for...
Page 77: Deleting A Station Name/Disc Title
Making changes with Function Mode Deleting a station name/disc title Press the [SELECT] (Right/Left) button to select the positions where characters will be input. Press the [RTN/BAND] button for more than two seconds while the The character will be inserted where title setting mode is activated.
Page 78: Setting Time (Clock Adjust)
Various Settings Switching demonstration screen Press the [SELECT] (Up/Down) display (Demo) button to set the clock display to ON or OFF. Demonstration screen display settings can be ATTENTION performed. Default setting is ON. If the demonstration screen display is set to ON, The clock display can also be turned on and off operation, motion picture, and other screens will by pressing the button [6] while the power is...
Page 79: Setting The Steering Remote Function (U.s.a. Only)
Making changes with Function Mode Setting the steering remote Reading steering remote data (U.S.A. only) function (U.S.A. only) The steering remote data that has been The vehicle’s factory loaded steering remote downloaded from E-iSERV (website) to a becomes inoperable when the CD3200 is USB memory or CD-R can be loaded into the installed.
Page 80 Various Settings Press the [ENTER] button. The CD-R or USB memory data is read. While it is reading, "READING" is displayed. If the data can be read successfully, "COMPLETED" will appear on the display. When using CD-R data, the CD-R will automatically eject when reading is complete.
Page 81 Making changes with Function Mode Compatibility with various switches The compatibility of the main unit's various modes and the steering remotes installed on your vehicle are as follows: Mode Switch Button Disc/USB Power BT-Audio BT-TEL function Name Tuner iPod mode mode mode Press...
Page 82 Various Settings Mode Switch Button Disc/USB Power BT-Audio BT-TEL function Name Tuner iPod mode mode mode Press — — — — — — ON HOOK briefly ON HOOK Press and — — — — — — — hold The TEL The TEL The TEL The TEL...
Page 84: How To Operate The Main Unit With An Optional Cd Changer Connected
About the optional unit How to operate the main unit with an optional CD changer connected About the optional unit Fast Forward/Rewind This section covers the operation of an optional CD changer that is connected to the main unit. Fast forward or rewind the song currently being Listening to a CD played.
Page 85: Repeating The Same Track (Repeat)
How to operate the main unit with an optional CD changer connected Repeating the same track • When any of the functions - "Playing the beginning of tracks", "Repeating the same (REPEAT) track" or "Playing tracks in random order" - is selected, a message such as "SCAN", "ALL SCAN", "REPEAT", "ALL REPEAT", Press the [5 RPT] button.
Page 86: How To Operate The Tuner With An Optional Hd Radio Tuner Connected (U.s.a. Only)
About the optional unit How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) About HD Radio Switching between displays About the optional unit when receiving HD Radio If the optional HD Radio tuner unit is connected, terrestrial digital broadcasts can be received.
Page 87 How to operate the tuner with an optional HD Radio tuner connected (U.S.A. only) Press the [SELECT] (Up/Down) button to select Auto or OFF. In the [Auto] setting, the selection is switched between digital and analog reception automatically. areas where digital reception is not possible, reception is automatically switched to analog to avoid loss of reception.
Page 88: How To Operate The Tuner With An Optional Xm Satellite Radio Tuner Connected (U.s.a./Canada Only)
About the optional unit How to operate the tuner with an optional XM satellite radio tuner connected (U.S.A./CANADA only) About XM satellite radio Selecting a channel About the optional unit If the optional XM satellite radio tuner unit is Press the [RTN] button for less connected, satellite radio broadcasts can be than one second to switch to the received.
Page 89: Operations During Rotary Mode
How to operate the tuner with an optional XM satellite radio tuner connected (U.S.A./CANADA only) Operations during rotary mode Press the [SELECT] (Up/Down) button to select the channel Turn the [VOL] button to the left or number to be input. right.
Page 90: Preset Channel Scan
About the optional unit Preset channel scan Displaying the XM ID This function enables the reception of all the Displays the XM ID. The XM ID is necessary channels in the preset buttons for five seconds when subscribing to programs, etc. each.
Page 92: How To Operate The Tuner With An Optional Sirius Satellite Radio Tuner Connected (U.s.a./Canada Only)
About the optional unit How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A./CANADA only) About SIRIUS satellite radio Selecting a channel About the optional unit If the optional SIRIUS satellite radio tuner unit is Press the [RTN] button for less connected, satellite radio broadcasts can be than one second to switch to the received.
Page 93: Category Selection
How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A./CANADA only) Category selection Press the [ENTER] button. The channel can be selected from among Reception starts. categories such as POP and ROCK. Consult the SIRIUS website for the details of Manually storing channels into the categories.
Page 94: Switching Displays When Using The Sirius Satellite Radio
About the optional unit To stop the preset scan mode at the desired channel, press the [SELECT] (Down) button again. The main unit will stay tuned to the desired channel. Switching displays when using the SIRIUS satellite radio Press the [SCREEN/TEXT] button for more than one second.
Page 96: How To Operate The Main Unit With An Optional Interface Adapter For Ipod Connected
About the optional unit How to operate the main unit with an optional Interface Adapter for iPod connected About the optional unit An iPod can be connected to the main unit using the optional Interface Adapter for iPod (iPC-106), allowing you to listen to iPod music files and operate some iPod functions from the main unit. For details on connecting the Interface Adapter for iPod, as well as settings and other information, refer to the OWNER’S MANUAL of the Interface Adapter for iPod.
Page 97: Searching For A Music File
How to operate the main unit with an optional Interface Adapter for iPod connected Searching for a music file Turn the [VOL] button to select the desired search mode item, and The iPod search mode can be operated from the then press the [ENTER] button.
Page 98: Repeating The Same Music File (Repeat)
About the optional unit Repeating the same music file Displaying text (REPEAT) The display can be switched to show the album name, the artist name and the song name. Press button [5]. Press the [SCREEN/TEXT] button for more than one second. Pressing this button causes the The album name, the artist name iPod to repeat the music file cur-...
Page 100: Others
About the optional unit Others Connecting a portable audio Switching the AUX mode on and off About the optional unit player to the AUX jack Press the [ /MENU] button for more than one second. Use a commonly available accessory cable with an RCA connector or an optional AUX105 to The Menu selection mode is activated.
Page 101: Changing Auxiliary Input Sensitivity
Others Changing auxiliary input sensitivity The sensitivity of the auxiliary mode can be changed. Press the [ /MENU] button for more than one second. The Menu selection mode is activated. Press the [SELECT] (Up/Down) button to select FUNC, and then press the [ENTER] button.
Page 102: If You Have A Question
Other information If you have a question: Other information Check the items mentioned below before attempting to troubleshoot problems. CAUTION If a problem occurs, for instance when the main unit does not respond to any button presses, or the display doesn't work correctly, press the [RESET] button using a paper clip or similar item. Pressing the [RESET] button will delete all the entries from memory.
Page 103 If you have a question: Information Explanation and remedial action • Turn the ACC off, and then turn it on again to resume the INFO 7 INTERNAL POWER SUPPLY operation. FAILURE IS OCCURRING • If this condition persists, please contact your dealer. The CD changer is in the process of verifying the presence of CDs after a magazine has been inserted into the CD LOAD...
Page 104: When You Think There Is A Malfunction
Other information When you think there is a malfunction A slight difference in operation may be mistaken for a malfunction. Please check the items in the following table first. If the unit does not work, even after the appropriate remedial action has been taken, please contact your dealer.
Page 105 If you have a question: Refer Mode Problems Causes Remedial action page The disc cannot Has an extra label or sticker been applied to Do not apply labels or stickers be inserted. the disc? to the disc. The disc is ejected as soon Try inserting another disc.
Page 106: Specifications
Other information Specifications Other information <GENERAL> Power Supply 14.4V DC (11-16V) Current Drain Dimensions (W x H x D) In-Dash Main unit 7“ x 2” x 6-1/8“ (178 x 50 x 155mm) Mass (weight) Approx. 1.7kg Usage temperature range -20°C to +65°C (-4°F to +149°F ) Storage temperature range -40°C to +85°C (-20°F to +185°F ) <FM TUNER>...
Page 107 Specifications <Bluetooth Audio> Bluetooth Specification Bluetooth Specification Ver.2.0 Output Power class 2 (Max +4dBm) Profile A2DP Ver.1.0 AVRCP Ver.1.0 <Bluetooth Handsfree> Bluetooth Specification Bluetooth Specification Ver.2.0 Output Power class 2 (Max +4dBm) Profile HFP Ver.1.5 OPP Ver.1.1 <AUDIO AMPLIFIER> Power Output 14W x 4 (20Hz to 20kHz, 1% THD, 4Ω, Vcc=14.4V) Maximum of 50W x 4...
Page 108: How To Contact Customer Service
Other information How to contact customer service Other information Should the product require service, please contact the following Eclipse dealer near your house. <U.S.A/CANADA> Fujitsu Ten Corp. of America 19600 South Vermont Avenue, Torrance, CA 90502 Phone: 1-800-233-2216 (Information) <AUSTRALIA> Fujitsu Ten (Australia) PTY LTD.
Page 109 How to contact customer service <THAILAND> Safe-T-Cut (Thailand) Co., Ltd. 114/9 Soi Suwansawadi, Thungmahamek, Rama 4 Rd., Sathorn, Bangkok 10120, Thailand. Phone: 02-671-9610-12 Fax: 02-671-9614 XXIII...
Page 110: Security Code
Other information IMPORTANT RECORD YOUR “KEY CD (SECURITY CODE)” HERE... STORE YOUR “KEY CD (SECURITY CODE)”ALONG WITH YOUR OWNER'S MANUAL.
Page 111 How to contact customer service XXIII...

Eclipse CD3200 Owner's Manual

Quick Links

Need help?

Questions and answers

Related Manuals for Eclipse CD3200

Summary of Contents for Eclipse CD3200

Table of Contents