INSTRUCTIONS FOR USE INSTALLATION INSTRUCTIONS ABSORPTION - REFRIGERATOR for CARAVAN and MOTORHOME RM 7271 L RM 7275 L RM 7291 L RM 7295 L RM 7361 L RM 7365 L RM 7371 L RM 7401 L RM 7405 L Record for future reference: Model number ..........
INTRODUCTION FOR YOUR SAFETY Warning and safety notices Coolant WARRANTY AND CUSTOMER SERVICE Damage in transit DESCRIPTION OF MODEL REFRIGERATOR GUIDE Cleaning Using the refrigerator Storing food Making ice cubes Defrosting Positioning the storage racks Door locking Switching off the refrigerator Winter operation 5.10 Interior light 5.11 Changing the decor panel...
1 1 . . 0 0 INTRODUCTION You have made an excellent choice in selecting the Dometic Absorption Refrigerator. We are sure that you will be fully satisfied with your new appliance in all respects. The appliance, which works silently, meets high quality standards and guarantees the efficient utilisation of resources and energy throughout its entire life cycle, during manufacture, in use and when being disposed of.
The warranty does not cover any modifications to the appliance or the use of non-original Dometic parts; the warranty does not apply if the installation and operating instructions are not adhered to and no liability shall be entertained.
Using the refrigerator The cooling unit is silent in operation. When the appliance is first put into operation, there may be a mild odour which will disappear after a few hours. Ensure the living area is well ventilated. The refrigerator will take several hours to reach its operating temperature in the cooling compartment The freezer compartment should be cold about one hour after switching on the refrigerator.
Proceed to the description that applies to YOUR model. A. Manual Energy Selection Electrical operation 5.2.2 1. 12V - operation (DC) The refrigerator should only be used while the motor is running, otherwise the on-board-battery would be discharged within a few hours! 1.
(e.g. air in the gas pipe). 5. Briefly switch the refrigerator off and then on again using main switch (A). To remove air from the gas pipes, repeat this procedure 3-4 times. If these actions do not help, please call an authorised Dometic Service Centre.
Page 9
B. Automatic Energy Selection (only with RM 7XX5 L) 5.2.5 “AUTO”-operation RM7XX5 L - models are equipped with an “AUTO”-MATIC function. Set energy selection switch (A) to position “AUTO” . The LED "AUTO" illuminates Manual operation is possible at any time. Explanations: Upon switching on, the electronics automatically select one of the three possible energy types: 230V - 12V - liquid gas.
T T I I P P and 77°F. The unit operates within its optimum performance range. DOMETIC refrigerators work according to the absorption principle. Due to physical reasons, an absorption system responds slowly to changes made on the thermostat controller, or a loss in cooling through opening the door, or storing food.
Making ice cubes Ice cubes are best frozen overnight. At night, the refrigerator has less work to do and the unit has more reserves. 1. Fill the ice 2. Place the ice cube cube tray with tray in the freezer drinking water.
Door locking open close park-position / vent-position Switching off 1. Set energy selector switch (A) 2. Secure the door open by means of the door to position "0" (OFF). The stop. The door will be slightly ajar. This is to appliance is now fully switched prevent mould from forming inside off.
2. Detach defective light 3. Fit new light bulb bulb. Note: For 12V DC : 1 light bulb 12V, 2W Please contact Dometic Service Centres for 4. Clip the cover back in replacement light bulbs. place. 5.11 Changing the decor panel 3.
5.12 Changing the doorhang It is not always possible to change the door when the refrigerator is installed. 1. Open the door, 2. Take off the door by unscrew the hinge moving it upwards. screw and keep it to hand. 5.
5.13 Troubleshooting Before calling the authorised Service Department, please check whether: 1. The instructions in the section "Using the refrigerator" have been followed. 2. The refrigerator is not tilted excessiveley. 3. It is possible to operate the refrigerator with an available power source. Failure : The refrigerator does not work in gas operation mode.
5.15 Product liability Product liability of Dometic GmbH does not include damages which may arise from faulty operation, improper alterations or intervention in the equipment, adverse effects from the environment such as changes in temperature and air humidity, which may impact the equipment itself or the direct vicinity of the equipment or persons in the area.
5.19 Technical data Model Dimensions Gross capacity Usable Connection * Consumption Netweight Ignition Stepped- H x W x D (mm) incl. freezer capacity of Mains / Battery electricity / gas Flame cabinet depth incl. door compartment freezer in 24 hrs Failure compartment Device...
In some OEM appli- cations it may not be possible for these instructions to be followed exactly. In this case an authorised Dometic representative may issue supplementary instruction. Installation The appliance and its fume extraction shall be installed in such a way as to be acces- sible for servicing at all times and must be capable of easy removal and installation.
The device manufacturer's product liability and guarantee shall lapse if such materials are used. Proposal 1: Using the Installation Sealing Kit from Dometic FIG. 1 (SP.No. 241 2559-00, available from Dometic) Insert lipped seals (A) into the installation recesses at the bottom and at each side.
13cm². The ventilation grilles must have an open cross-section of at least 250cm². This is reached using the Dometic Absorber Ventilation and Air Extraction System L100 / L 200 that has been tested and approved for this purpose.
Installing the ventilation system L 200 L 100 To install the ventilation grilles, cut two rectangles (451mm x 156mm) in the outer wall of the vehicle (for position of the cuts, see point “6.3”). Item 1 does not apply for installation framess with an integrated seal.
Installation recess The refrigerator must be installed draught-free in a recess (see point “6.2”). The measurements of the recess are given in the table below. Step (A) is only required for cabinets with a step. Push the appliance far enough into the recess until the front edge of the refrigerator casing is flush with the front of the recess.
Fume extraction Fume extraction must be arranged in such a way as to provide complete extraction of all products of combustion to an area outside the living area. The flue system must slope in an upward direction in order to avoid a build-up of condensation.
Gas installation The rules in point 6.1 must be adhered to. When running on gas, these appliances are intended exclusively to use liquid gas (propane) - under no circumstances should town gas or natural gas be used. An AGA Approved LP Regulator must be fitted to the gas supply. The pressure regulator must concur with the operating pressure specified on the data plate of the appliance.
The power cable must be laid in such a way that it does not come in contact with hot components of the unit/burner or with sharp edges. If the connection cable is damaged it must be replaced by the Customer Service at Dometic, or by respectively qualified personnel, in order to prevent any hazards. Battery connection 6.9.2...
Page 26
(solar charge regulator) 6.9.5 Retrofitting For all RM 7xx1 MES appliances there is an additional possibility for retrofit- ting to an RM 7xx5 device with AES functions. Please consult your nearest Dometic Customer Service or your specialist dealer.
6.9.6 Wiring diagram Wiring diagram for RM 7XX1 L - models and RM 7XX5 L - models ignition unit Connections: ionisation A = Ground heating element DC plug B = Plus heating element DC C = Ground electronics ignition D = Plus electronics plug Reed contacts (sensor switching)
Page 28
Dometic GmbH In der Steinwiese 16 D-57074 Siegen GERMANY www.dometic.com...
Need help?
Do you have a question about the RM 7271 L and is the answer not in the manual?
Questions and answers