Table of Contents
Advertisement
The starting time for EPG is the current time. You can see the
event information for the next two hours. By pressing " / " key,
you can go to the next/previous programs. If you press SELECT
when a next event is highlighted, a reminder is set for the
highlighted program and a clock appears on the screen. Program
reminders can be set to signal that a program is about to start
when you are watching another channel. If you set reminder to a
program, then you will be asked for switching to that channel when
the reminder time is reached.
6.2. MESSAGES
When the box receives no signal (e.g. the antenna cable is disconnected), "NO
SIGNAL" message is seen on the screen.
When there is no channel stored in the box, Timer Menu, Channel Table Menus are not accessible. Channel
navigation is not allowed. Therefore, trying to enter these menus or do channel navigation will display "First Add
new Channels!" message on the screen.
6.3. CHANNEL NAVIGATION
There are two ways to navigate through the channels:
1. Pressing P+/P- keys will help you to go to the next or the previous channel in the list.
2. Pressing a number key will activate a small digit entry window on the left upper corner of the screen. After a digit
is entered, the box will wait for 2 seconds till you enter another digit. If no digit is entered during these 2 seconds,
then the box will switch to the entered number channel.
18
Advertisement
Table of Contents
