Speaker System Set Up - Hitachi AXM628E Instruction Manual

Speaker System Set up

Connect the supplied speaker system using the supplied speaker cords by matching
the colours of the terminals.
Avoid short circuiting your amplifier
Please ensure that the bare + and – wires don't touch each other when connected to the speaker
terminals, as your system may be damaged.
Note
Be sure to match the speaker cord to the appropriate terminal on the components:
+ to + and - to -.If the cords are reversed,the sound will be distorted and will lack of bass.
If you use speakers with low maximum input rating,adjust the volume carefully to avoid
excessive output on the speakers.
Note:
Attach loudspeaker wires to the unit.
Left speaker:connect the red wire to
terminal L+" and connect the black wire "
to terminal "L-".
Right speaker:connect the red wire to
terminal "R+" and connect the black wire
to terminal "R-".
15