Hitachi AX-M138 Instruction Manual page 21

b. Manual Tune
When the display shows the System Reset
Press the INFO button, the display shows
b.1 Press SEL - / SEL + on remote control until the unit shows your desired station
b.2 Press SELECT to confirm
b.3 Repeat above procedures for selecting another station
c. Software Version
In DAB or FM mode .Press and hold 'INFO' for 2 seconds,release and press 'INFO' again.
Other (DAB)
1. If the station signal is week or the antenna is removed, the word "NO" will be shown on display:
2. If the signal is not available after the autoscan, the word "NO SIGNAL" will be shown on display:
3. If the unit didn't receive any signal and shows:
You can press SELECT button, the unit will re tune and return back the pervious station.
4. If you power off and turn on the unit again, the display shows the following
- - : - -
FM Playing
1. Press the function button (FUNCTION) on the front of the unit "Tuner" is displayed.
2. Press DAB/FM on remote control to select DAB or FM
3. If you select the FM, the display shows:
BBC
RESET
BBC
MANUAL TUNE
BBC
NO SIGNAL
NO SIGNAL
BBC
NO SIGNAL
DAB
RADIO
FM
RADIO
- 20 -
BBC N
BBC D