Table of Contents
Advertisement
KNOW YOUR HAND MIXER
USING YOUR MIXER
1. For the first use, cleaning the dough hooks and beaters.
2. Assemble proper beaters or dough hooks into mixer.
Note: Beaters can be inserted in either socket, as the beaters are identical. For
dough hooks, the one with washer can only be inserted into the big socket and the
other one can only be inserted into small socket. The two dough hooks cannot be
inserted in reverse.
3.Ensure that the unit is at the 0 setting, then plug in the power source.
4.Turn the speed selector to your desired setting, there is 6 setting. The appliance
will start working and the speed will increase 15% if the Turbo Button depressed at
any time (the left is the same as the right, but can not depress at the same time).
Warning: Do not stick knife, metal spoons, fork and so on into bowl when
operating.
5.The max operation time per time shall not exceed 5 minutes and minimum 10
minutes rest time must be maintained between two consecutive cycles. When
kneading yeast dough, suggest the speed selector first use a low speed and then
use high speed to achieve best results.
6.When mixing is completed, turn the speed selector to 0 setting, unplug the cord
from power outlet.
7. If necessary you can scrape the excess food particles from the beaters or dough
hooks by rubber or wooden spatula.
8.Hold the beaters/dough hooks with one hand and press the Ejection button firmly
down with the other hand, remove the beater/dough hooks.
Note: Remove the beaters/dough hooks only at the 0 setting.
Cleaning and Maintenance
1. Unplug the appliance and wait it completely cool down before cleaning.
2. Wipe over the outside surface of the mixer with a dampened cloth and polish
with a soft dry cloth.
3. Wipe any excess food particles from the power cord.
Advertisement
Table of Contents
Need help?
Do you have a question about the CP43139 and is the answer not in the manual?
Questions and answers
Como poner las cuchillas de mover
To install the blades on the Continental Electric CP43139:
1. Make sure the speed selector is set to "0" and the unit is unplugged.
2. Choose the correct attachments: use beaters or dough hooks as needed.
3. For beaters: they are identical and can be inserted into either socket.
4. For dough hooks: insert the one with a washer into the big socket and the other into the small socket. Do not reverse them.
5. Ensure the attachments are securely locked in place before use.
This answer is automatically generated
Como poner las aspas no tengo el manual
To install the blades on the Continental Electric CP43139 hand mixer:
1. Make sure the mixer is unplugged and the speed control is set to “OFF” or “O”.
2. Insert each beater one at a time into the holes on the bottom of the mixer.
3. Gently rotate and press the beater until it clicks into place.
This answer is automatically generated